1
R&S®MXO 5 series
High-performance 12-bit ADC digital oscilloscope (4/8 channels)
- Category: Oscilloscopes
- Manufacturer: Rohde & Schwarz
- Bandwidth: 100 MHz – 2 GHz
- Sample rate: max. 5 GSa/s (2ch) / 2.5 GSa/s (4ch)
- Channels: 4 / 8 analog channels (+16 digital channels, optional)
- ADC resolution: 12-bit (up to 18-bit in HD mode)
- Memory depth: 500 Mpoints/channel standard (upgradeable to 1 Gpoint)
- Waveform update rate: >4,500,000 wfms/s (fastest in the industry)
- Display: 15.6" full HD capacitive touchscreen
- Data sheet: Download PDF
- Product brochure: Download PDF
- External link: Official product page
Product overview
The R&S®MXO 5 series is the 4- and 8-channel version of the MXO platform, with a 12-bit ADC (up to 18-bit in HD mode) and an industry-leading waveform update rate of more than 4.5 million wfms/s. Bandwidths run from 100 MHz to 2 GHz, memory is 500 Mpoints deep as standard and the display is a 15.6" full HD touchscreen, which suits it to multi-channel work in electronics design, automotive electronics, power analysis and high-speed digital interface debugging.
Key features
- Industry-leading waveform update rate of >4,500,000 wfms/s, catching rare events
- Native 12-bit ADC resolution, up to 18-bit in HD mode
- Vertical sensitivity down to 500 µV/div at full bandwidth
- Trigger jitter as low as 1 ps and trigger sensitivity of 0.0001 div
- Four simultaneous FFT spectra, with independent control of the time and frequency domains
- Zone trigger on analog, spectrum and math waveforms
- 15.6" full HD capacitive touchscreen and quiet operation
Typical applications
- Automotive electronics and in-vehicle networks (CAN/CAN-FD/CAN-XL/LIN/SENT/automotive Ethernet)
- Power integrity and power converter analysis
- High-speed digital interface and serial bus debugging
- Embedded system and MCU development
- Aerospace and defence bus testing (ARINC 429, MIL-1553, SpaceWire)
Configure your R&S®MXO 5 Series
Pick a base model and its options, watch your order list build as you go, then send it for a quote in one click. Every order number (Order No.) comes from Rohde & Schwarz factory data.
2
Hardware options
12 options
3
Software options (K-options)
13 options
4
Probes
34 options
5
PC software
7 options
6
Accessories
15 optionsAvailable models / variants
This series comes in the following 8 variants. Click “Request a quote” to ask KanTek for the full specifications and pricing of the model you need.
| Model code | Specification differences | |
|---|---|---|
| MXO54 | 4 channels / 350 MHz | Request a quote → |
| MXO58 | 8 channels / 100 MHz | Request a quote → |
| MXO54-B245 | 4 channels / 500 MHz | Request a quote → |
| MXO58-B285 | 8 channels / 500 MHz | Request a quote → |
| MXO54-B2410 | 4 channels / 1 GHz | Request a quote → |
| MXO58-B2810 | 8 channels / 1 GHz | Request a quote → |
| MXO54-B2420 | 4 channels / 2 GHz | Request a quote → |
| MXO58-B2820 | 8 channels / 2 GHz | Request a quote → |
Frequently asked questions
Yes. KanTek Technology is the authorized Taiwan distributor for Rohde & Schwarz, supplying new R&S®MXO 5 Series instruments with factory quotations and technical advice.
Instrument rental is launching soon. R&S®MXO 5 Series is part of the line-up being prepared, and advance enquiries are welcome.
Yes. KanTek provides calibration and repair for R&S®MXO 5 Series, with calibration performed by a partner laboratory, to keep the instrument accurate and available.
Use Request a quote on this page, or call +886-2-2999-7719. KanTek replies within 24 hours with pricing, lead time and the options that suit your application.
R&S®MXO 5 Series is a Rohde & Schwarz product: High-performance 12-bit ADC digital oscilloscope (4/8 channels); 4-channel models from 350 MHz, 8-channel models from 100 MHz. Contact KanTek for selection or application advice.
Authorized R&S distributor
Repair and calibration services
Instrument rental, launching soon
Reply within 24 hours
Need R&S®MXO 5 Series pricing, rental or calibration?