1
R&S®ZNL
Three-in-one vector network analyzer (5 kHz – 20 GHz, with spectrum analysis)
- Category: Vector network analyzer
- Manufacturer: Rohde & Schwarz
- Frequency range: 5 kHz to 20 GHz (model dependent, 20 GHz maximum)
- Test ports: 2 ports (bidirectional measurements)
- Spectrum analyzer option, upper frequency limit: 26.5 GHz
- Analysis bandwidth (option): 40 MHz
- Receiver step attenuator (option): up to 30 dB in 10 dB steps
- Dimensions (W x H x D): 40.8 cm × 18.6 cm × <24 cm
- Weight: 6 ~ 8 kg
- Display: 10.1" touchscreen
- Dynamic range: High dynamic range (see the data sheet for figures)
- Trace noise: Low trace noise (see the data sheet for figures)
- Data sheet: Download PDF
- Product brochure: Download PDF
- External link: Official product page
Product overview
The R&S®ZNL is versatile and portable: a vector network analyzer, a spectrum analyzer and a power meter in one instrument, for excellent measurements in the field and in the lab. The base models cover 5 kHz to 20 GHz and can be extended with a fully integrated spectrum analyzer to 26.5 GHz and with RF power meter support. Its option concept keeps the investment down, letting a development lab, a service centre, a university or a production floor replace several instruments with one compact box — and gain measurement speed and RF performance in the process.
Key features
- Wide frequency range from 5 kHz up to 20 GHz, covering a broad spread of applications
- High dynamic range and low trace noise, for accurate S-parameter measurements
- Two-port vector network analyzer for bidirectional measurements
- Optional fully integrated spectrum analyzer on a hardware board, for up to 26.5 GHz
- Three in one: vector network analyzer, spectrum analyzer and power meter in a single compact housing
- A calibration wizard that walks you through S-parameter setup and the calibration standards
- Highly extensible: options for time domain analysis, distance-to-fault, analog demodulation (AM/FM/PM), an independent CW source, noise figure measurements and YIG preselector bypass
- Supports up to four R&S®NRP power sensors at once for accurate power measurements
- Optional lithium-ion battery pack, which makes it a fully portable field instrument
- Optional 12 V / 24 V DC supply for vehicle and field power
- Compact housing (40.8 cm wide × 18.6 cm high × under 24 cm deep), weighing only 6 to 8 kg
Typical applications
- Characterization of RF and microwave components (S-parameters of filters, amplifiers, antennas, connectors)
- Electromagnetic compatibility (EMC) testing
- High-speed digital interface test
- Power electronics component test
- Consumer electronics test
- Antenna research and material characterization
- Academic research and engineering education
- Field maintenance and service centre troubleshooting (distance-to-fault measurements)
Configure your R&S®ZNL
Pick a base model and its options, watch your order list build as you go, then send it for a quote in one click. Every order number (Order No.) comes from Rohde & Schwarz factory data.
2
Hardware options
28 options
3
Software options (K-options)
6 options
4
Probes
6 options
5
Accessories
31 optionsAvailable models / variants
This series comes in the 5 model variants below. Click Request a quote to ask KanTek for the full specifications and a price for the model you need.
| Model | Specification | |
|---|---|---|
| R&S®ZNL3 (1323.0012.03) | 3 GHz / 5 kHz / 2 / N (f) | Request a quote → |
| R&S®ZNL4 (1323.0012.04) | 4.5 GHz / 5 kHz / 2 / N (f) | Request a quote → |
| R&S®ZNL6 (1323.0012.06) | 6 GHz / 5 kHz / 2 / N (f) | Request a quote → |
| R&S®ZNL14 (1323.0012.14) | 14 GHz / 5 kHz / 2 / N (f) | Request a quote → |
| R&S®ZNL20 (1323.0012.20) | 20 GHz / 5 kHz / 2 / 3.5 mm (m) | Request a quote → |
Frequently asked questions
Yes. KanTek Technology is the authorized Taiwan distributor for Rohde & Schwarz, supplying new R&S®ZNL instruments with factory quotations and technical advice.
Instrument rental is launching soon. R&S®ZNL is part of the line-up being prepared, and advance enquiries are welcome.
Yes. KanTek provides calibration and repair for R&S®ZNL, with calibration performed by a partner laboratory, to keep the instrument accurate and available.
Use Request a quote on this page, or call +886-2-2999-7719. KanTek replies within 24 hours with pricing, lead time and the options that suit your application.
R&S®ZNL is a Rohde & Schwarz product: Three-in-one vector network analyzer (5 kHz – 20 GHz, with spectrum analysis). Contact KanTek for selection or application advice.
Authorized R&S distributor
Repair and calibration services
Instrument rental, launching soon
Reply within 24 hours
Need R&S®ZNL pricing, rental or calibration?