1
Discontinued
Rohde & Schwarz has ended production of this model. The recommended successor is R&S®ZNB3000. If you need to keep your existing units running or are looking for an alternative, contact us about availability, used instruments, compatible alternatives and spare parts.
Rohde & Schwarz has ended production of this model. The recommended successor is R&S®ZNB3000. If you need to keep your existing units running or are looking for an alternative, contact us about availability, used instruments, compatible alternatives and spare parts.
R&S®ZNB Discontinued
Vector network analyzer (9 kHz – 43.5 GHz)
- Category: Vector network analyzer
- Manufacturer: Rohde & Schwarz
- Frequency range: 9 kHz to 43.5 GHz (model dependent)
- Ports: 2 ports or 4 ports (selectable)
- Dynamic range: up to 140 dB (up to 150 dB with options)
- Sweep time: 4 ms (401 points)
- Power sweep range: 98 dB
- Magnitude drift: typ. < 0.01 dB/°C
- Phase drift: typ. < 0.15°/°C
- Successor: R&S®ZNB3000
- Data sheet: Download PDF
- Product brochure: Download PDF
- External link: Official product page
Product overview
The R&S®ZNB vector network analyzer is a versatile instrument for mobile communications, consumer electronics, aerospace and defense, and an obvious choice for high-speed PCB design. Leading in speed, dynamic range and ease of operation, it supports the development, production and maintenance of RF components of every kind — amplifiers, mixers, filters and cables among them.
Key features
- High power handling alongside high sensitivity, so a DUT with a wide dynamic range can be measured in one go
- Very low trace noise, for accurate and stable results
- Fast synthesizer settling, which brings measurement time down to 4 ms for a 401-point sweep
- Wide IF bandwidth options for fast sampling
- Segmented sweep, which lets you spend measurement time where the band matters
- Mixed-mode S-parameters for characterizing balanced DUTs
- Built-in embedding and de-embedding, for correcting fixtures and interconnects
- Frequency conversion measurements, for mixers and other nonlinear components
- Two independent internal sources available as an option, for more measurement flexibility
Typical applications
- Development and production test of mobile communications RF components (filters, amplifiers, antennas)
- Characterization of aerospace and defense RF systems
- Signal integrity analysis on high-speed printed circuit boards
- Development and verification of consumer electronics and wireless products
- Test of mixers, modulators and other frequency converting components
- Loss and reflection measurements on cables, connectors and passive components
Configure your R&S®ZNB
Pick a base model and its options, watch your order list build as you go, then send it for a quote in one click. Every order number (Order No.) comes from Rohde & Schwarz factory data.
2
Hardware options
39 options
3
Software options (K-options)
16 options
4
PC software
4 options
5
Accessories
31 optionsAvailable models / variants
This series comes in the 9 model variants below. Click Request a quote to ask KanTek for the full specifications and a price for the model you need.
| Model | Specification | |
|---|---|---|
| R&S®ZNB4 | 2/4 ports, 9 kHz to 4.5 GHz | Request a quote → |
| R&S®ZNB8 | 2/4 ports, 9 kHz to 8.5 GHz | Request a quote → |
| R&S®ZNB20 | 2/4 ports, 100 kHz to 20 GHz | Request a quote → |
| R&S®ZNB26 | 2/4 ports, 100 kHz to 26.5 GHz | Request a quote → |
| R&S®ZNB40 | 2/4 ports, 100 kHz to 40 GHz | Request a quote → |
| R&S®ZNB43 (1334.3330.92) | 2 ports, 43.5 GHz, 2.92 mm connectors | Request a quote → |
| R&S®ZNB43 (1334.3330.93) | 2 ports, 43.5 GHz, 2.4 mm connectors | Request a quote → |
| R&S®ZNB43 (1334.3330.94) | 4 ports, 43.5 GHz, 2.92 mm connectors | Request a quote → |
| R&S®ZNB43 (1334.3330.95) | 4 ports, 43.5 GHz, 2.4 mm connectors | Request a quote → |
Frequently asked questions
R&S®ZNB has been discontinued by Rohde & Schwarz. KanTek Technology can help you evaluate and source the current successor, and can arrange factory repair and calibration for an existing R&S®ZNB.
Yes. Even though R&S®ZNB is discontinued, KanTek provides repair and calibration to extend the life of an existing instrument and keep its measurements accurate.
Yes. KanTek provides calibration and repair for R&S®ZNB, with calibration performed by a partner laboratory, to keep the instrument accurate and available.
Use Request a quote on this page, or call +886-2-2999-7719. KanTek replies within 24 hours with pricing, lead time and the options that suit your application.
R&S®ZNB is a Rohde & Schwarz product: Vector network analyzer (9 kHz – 43.5 GHz). Contact KanTek for selection or application advice.
Authorized R&S distributor
Repair and calibration services
Instrument rental, launching soon
Reply within 24 hours
Need R&S®ZNB pricing, rental or calibration?