1
R&S®ZNB3000
Vector network analyzer (9 kHz – 54 GHz, ultrafast production test)
- Category: Vector network analyzer
- Manufacturer: Rohde & Schwarz
- Frequency range: 9 kHz to 54 GHz (model dependent)
- Ports: 2 ports or 4 ports
- Dynamic range: up to 150 dB at 24 GHz; 138 dB at 54 GHz
- Sweep time: 11.7 ms (1 MHz to 54 GHz, 1,601 points)
- Output power: +11 dBm at 26.5 GHz; +3 dBm at 54 GHz
- Trace noise: typ. 0.0008 dB RMS
- Magnitude stability over temperature: <0.01 dB/°C
- Phase stability over temperature: 0.15°/°C
- Connector type: N (f), 3.5 mm (m), 2.92 mm (m), 1.85 mm (m), model dependent
- Data sheet: Download PDF
- Product brochure: Download PDF
- External link: Official product page
Product overview
The R&S®ZNB3000 vector network analyzer is built for maximum throughput in high-volume RF component production, covering 9 kHz to 54 GHz. DDS synthesizer technology gives ultrafast measurement cycles, and RF performance and long-term stability let a production line run for days without recalibration. Flexible frequency upgrades let the instrument grow with what the line has to test, and switch matrices extend it to as many as 48 test ports for large multiport setups.
Key features
- Ultrafast sweep cycles: DDS synthesizer technology sweeps 1 MHz to 54 GHz over 1,601 points in 11.7 ms, lifting production throughput
- Best-in-class dynamic range: up to 150 dB at 24 GHz, with an enhanced dynamic range mode for accuracy where it counts
- High output power: +11 dBm at 26.5 GHz, so amplifiers can be tested without external gain
- Excellent long-term stability: magnitude drift below 0.01 dB/°C and phase drift of 0.15°/°C, supporting days of continuous operation between calibrations
- Flexible frequency upgrades: every model can have its frequency range extended in the field, protecting the investment
- SCPI recorder: built in, and it shortens the path to an automated test program
- Multiport capability: R&S® switch matrices extend the analyzer to as many as 48 test ports for complex multiport devices
Typical applications
- High-volume production test of RF components (filters, passive devices)
- Characterization of front-end modules and active components
- Cable, connector and PCB test
- Amplifier gain compression measurements
- Measurements on frequency converting components (mixers, multipliers)
- Intermodulation distortion (IMD) measurements
- Data center high-speed cable and interface test (to 54 GHz)
Configure your R&S®ZNB3000
Pick a base model and its options, watch your order list build as you go, then send it for a quote in one click. Every order number (Order No.) comes from Rohde & Schwarz factory data.
2
Hardware options
25 options
3
Software options (K-options)
18 options
4
Accessories
29 optionsAvailable models / variants
This series comes in the 8 model variants below. Click Request a quote to ask KanTek for the full specifications and a price for the model you need.
| Model | Specification | |
|---|---|---|
| R&S®ZNB3004 | 9 kHz - 4.5 GHz (upgradeable to 9 GHz) / 2 / N (f) | Request a quote → |
| R&S®ZNB3004 | 9 kHz - 4.5 GHz (upgradeable to 9 GHz) / 4 / N (f) | Request a quote → |
| R&S®ZNB3020 | 9 kHz - 20 GHz (upgradeable to 26.5 GHz) / 2 / 3.5 mm (m) | Request a quote → |
| R&S®ZNB3020 | 9 kHz - 20 GHz (upgradeable to 26.5 GHz) / 4 / 3.5 mm (m) | Request a quote → |
| R&S®ZNB3032 | 9 kHz - 32 GHz (upgradeable to 43.5 GHz) / 2 / 2.92 mm (m) | Request a quote → |
| R&S®ZNB3032 | 9 kHz - 32 GHz (upgradeable to 43.5 GHz) / 4 / 2.92 mm (m) | Request a quote → |
| R&S®ZNB3044 | 9 kHz - 43.5 GHz (upgradeable to 54 GHz) / 2 / 1.85 mm (m) | Request a quote → |
| R&S®ZNB3044 | 9 kHz - 43.5 GHz (upgradeable to 54 GHz) / 4 / 1.85 mm (m) | Request a quote → |
Frequently asked questions
Yes. KanTek Technology is the authorized Taiwan distributor for Rohde & Schwarz, supplying new R&S®ZNB3000 instruments with factory quotations and technical advice.
Instrument rental is launching soon. R&S®ZNB3000 is part of the line-up being prepared, and advance enquiries are welcome.
Yes. KanTek provides calibration and repair for R&S®ZNB3000, with calibration performed by a partner laboratory, to keep the instrument accurate and available.
Use Request a quote on this page, or call +886-2-2999-7719. KanTek replies within 24 hours with pricing, lead time and the options that suit your application.
R&S®ZNB3000 is a Rohde & Schwarz product: Vector network analyzer (9 kHz – 54 GHz, ultrafast production test). Contact KanTek for selection or application advice.
Authorized R&S distributor
Repair and calibration services
Instrument rental, launching soon
Reply within 24 hours
Need R&S®ZNB3000 pricing, rental or calibration?