1
R&S®FPL1000
Signal and spectrum analyzer (5 kHz – 44 GHz, light and portable)
- Category: Signal and spectrum analyzer
- Manufacturer: Rohde & Schwarz
- Frequency range: 5 kHz – 44 GHz (model dependent; the FPL1044 starts at 10 Hz)
- Phase noise: typ. –108 dBc (1 Hz) at 10 kHz offset, 1 GHz carrier
- Displayed average noise level (DANL): typ. –163 dBm/Hz (10 MHz–2 GHz, with preamplifier)
- Third-order intercept (TOI): typ. +20 dBm
- Resolution bandwidth (RBW): 1 Hz – 10 MHz
- Analysis bandwidth: up to 40 MHz (requires option FPL1-B40)
- Real-time analysis bandwidth: 40 MHz (option FPL1-K41R)
- Weight: approx. 6 kg (with battery pack)
- Battery life: approx. 3 hours (option FPL1-B31 lithium-ion battery)
- Touchscreen: Touch operation with gesture control
- Data sheet: Download PDF
- Product brochure: Download PDF
- External link: Official product page
Product overview
The R&S®FPL1000 delivers high performance wherever you are: a signal and spectrum analyzer covering 5 kHz to 44 GHz depending on model, light enough to carry. One instrument handles spectrum analysis, power measurements with a power sensor, and analog and digital modulation analysis, which suits RF laboratories, production lines and field service equally. The FPL family is built around excellent phase noise (typ. –108 dBc at 10 kHz offset), a low noise floor (DANL typ. –163 dBm/Hz with the preamplifier) and a high third-order intercept (typ. +20 dBm), all driven from a direct touchscreen. With the optional lithium-ion battery it runs for about three hours away from mains power, and at roughly 6 kg it travels as easily as it sits on a bench.
Key features
- Frequency range 5 kHz to 44 GHz depending on model, reaching down to 10 Hz on the FPL1044, covering a wide spread of RF measurements
- Excellent phase noise: typ. –108 dBc (1 Hz) at 10 kHz offset, for accurate frequency analysis
- Very low displayed average noise level (DANL): typ. –163 dBm/Hz from 10 MHz to 2 GHz with the preamplifier, so weak signals stay visible
- High third-order intercept (TOI): typ. +20 dBm, holding linearity in the presence of strong signals
- Up to 40 MHz analysis bandwidth (option) for wideband capture and vector signal analysis (VSA)
- Direct touchscreen operation with gesture control, so a measurement is set up quickly
- Light at roughly 6 kg, and with the optional lithium-ion battery it runs for about three hours off mains, which suits field measurements
- A broad set of measurement applications (K options): EMI precompliance, phase noise, noise figure, vector signal analysis, analog modulation analysis and more
Typical applications
- Spectrum analysis and signal characterization in the RF laboratory
- EMI precompliance testing (option FPL1-K54), shortening the road to compliance
- Phase noise measurements (option FPL1-K40) to judge oscillator and synthesizer quality
- Noise figure and gain measurements (option FPL1-K30) for amplifiers and receivers
- Vector signal analysis (option FPL1-K70) for demodulation and EVM analysis of LTE, 5G NR and other digitally modulated signals
- Analog modulation analysis, AM/FM/PM (option FPL1-K7), for broadcast and communications systems
- Power sensor measurements (option FPL1-K9) with R&S®NRP sensors for accurate power measurement
- Field RF measurement and maintenance, on battery power, for aerospace, defense and telecom sites
Configure your R&S®FPL1000
Pick a base model and its options, watch your order list build as you go, then send it for a quote in one click. Every order number (Order No.) comes from Rohde & Schwarz factory data.
2
Hardware options
15 options
3
Software options (K-options)
10 options
4
PC software
13 options
5
Accessories
9 optionsAvailable models / variants
This series comes in the 5 model variants below. Click Request a quote to ask KanTek for the full specifications and a price for the model you need.
| Model | Specification | |
|---|---|---|
| R&S®FPL1003 | 5 kHz – 3 GHz / < –108 dBc (1 Hz) at 10 kHz offset / typ. < –163 dBm/Hz at 1 GHz (with preamplifier) | Request a quote → |
| R&S®FPL1007 | 5 kHz – 7.5 GHz / < –108 dBc (1 Hz) at 10 kHz offset / typ. < –163 dBm/Hz at 1 GHz (with preamplifier) | Request a quote → |
| R&S®FPL1014 | 5 kHz – 14 GHz / < –108 dBc (1 Hz) at 10 kHz offset / < –160 dBm/Hz (with preamplifier) | Request a quote → |
| R&S®FPL1026 | 5 kHz – 26.5 GHz / < –108 dBc (1 Hz) at 10 kHz offset / < –160 dBm/Hz (with preamplifier) | Request a quote → |
| R&S®FPL1044 | 10 Hz – 44 GHz / < –108 dBc (1 Hz) at 10 kHz offset / < –160 dBm/Hz (with preamplifier) | Request a quote → |
Frequently asked questions
Yes. KanTek Technology is the authorized Taiwan distributor for Rohde & Schwarz, supplying new R&S®FPL1000 instruments with factory quotations and technical advice.
Instrument rental is launching soon. R&S®FPL1000 is part of the line-up being prepared, and advance enquiries are welcome.
Yes. KanTek provides calibration and repair for R&S®FPL1000, with calibration performed by a partner laboratory, to keep the instrument accurate and available.
Use Request a quote on this page, or call +886-2-2999-7719. KanTek replies within 24 hours with pricing, lead time and the options that suit your application.
R&S®FPL1000 is a Rohde & Schwarz product: Signal and spectrum analyzer (5 kHz – 44 GHz, light and portable). Contact KanTek for selection or application advice.
Authorized R&S distributor
Repair and calibration services
Instrument rental, launching soon
Reply within 24 hours
Need R&S®FPL1000 pricing, rental or calibration?