1
R&S®RTB 2 series
Entry-level 10-in-1 oscilloscope (built-in 25 MHz AWG)
- Category: Oscilloscopes
- Manufacturer: Rohde & Schwarz
- Bandwidth: 70 MHz / 100 MHz / 200 MHz / 300 MHz
- Channels: 2 or 4 analog channels
- Sample rate: up to 2.5 GSa/s
- Memory depth: 10 Msample standard (20 Msample interleaved, 160 Msample segmented)
- ADC resolution: 10-bit (four times that of a conventional 8-bit converter)
- Display: 10.1" capacitive touchscreen
- Built-in functions: 25 MHz AWG, 3-digit voltmeter, 6-digit frequency counter
- Data sheet: Download PDF
- Product brochure: Download PDF
- External link: Official product page
Product overview
The R&S®RTB 2 is the next-generation entry-level oscilloscope Rohde & Schwarz introduced at electronica 2024 and the successor to the RTB2000 series. Built around the “power of ten” idea, it combines a 10-bit ADC, 10 Msample of memory and a 10.1" touchscreen. Oscilloscope, logic analyzer, protocol analyzer, arbitrary waveform generator, frequency counter and voltmeter come in one instrument, making it a high-value answer for education, embedded design debugging, production line testing and power signal analysis.
Key features
- 10-bit A/D converter, with four times the vertical resolution of a conventional 8-bit design
- 10.1" capacitive touchscreen for intuitive operation
- Built-in 25 MHz arbitrary waveform generator (pattern generation up to 50 Mbit/s)
- Segmented memory captures protocol signals separated by long idle intervals
- Mask testing with statistical pass/fail evaluation
- MSO-ready: expandable by 16 digital channels
- Triggering and decoding for I²C / SPI / UART / CAN / LIN
- Frequency response analysis (FRA) built in
Typical applications
- Teaching laboratories at colleges and universities
- Embedded system design and debugging
- Production and service testing
- Signal analysis on switched-mode power supplies
- Communication bus protocol debugging
Configure your R&S®RTB 2 Series
Pick a base model and its options, watch your order list build as you go, then send it for a quote in one click. Every order number (Order No.) comes from Rohde & Schwarz factory data.
2
Hardware options
2 options
3
Software options (K-options)
5 options
4
Probes
15 options
5
PC software
1 option
6
Accessories
5 optionsAvailable models / variants
This series comes in the following 8 variants. Click “Request a quote” to ask KanTek for the full specifications and pricing of the model you need.
| Model code | Specification differences | |
|---|---|---|
| RTB22-70 | 2 channels / 70 MHz | Request a quote → |
| RTB22-100 | 2 channels / 100 MHz | Request a quote → |
| RTB22-200 | 2 channels / 200 MHz | Request a quote → |
| RTB22-300 | 2 channels / 300 MHz | Request a quote → |
| RTB24-70 | 4 channels / 70 MHz | Request a quote → |
| RTB24-100 | 4 channels / 100 MHz | Request a quote → |
| RTB24-200 | 4 channels / 200 MHz | Request a quote → |
| RTB24-300 | 4 channels / 300 MHz | Request a quote → |
Frequently asked questions
Yes. KanTek Technology is the authorized Taiwan distributor for Rohde & Schwarz, supplying new R&S®RTB 2 Series instruments with factory quotations and technical advice.
Instrument rental is launching soon. R&S®RTB 2 Series is part of the line-up being prepared, and advance enquiries are welcome.
Yes. KanTek provides calibration and repair for R&S®RTB 2 Series, with calibration performed by a partner laboratory, to keep the instrument accurate and available.
Use Request a quote on this page, or call +886-2-2999-7719. KanTek replies within 24 hours with pricing, lead time and the options that suit your application.
R&S®RTB 2 Series is a Rohde & Schwarz product: Entry-level 10-in-1 oscilloscope with a built-in 25 MHz arbitrary waveform generator. The RTB22 and RTB24 are the standard 70 MHz base models; the RTB22-100 and above are official R&S preconfigured bundles.. Contact KanTek for selection or application advice.
Authorized R&S distributor
Repair and calibration services
Instrument rental, launching soon
Reply within 24 hours
Need R&S®RTB 2 Series pricing, rental or calibration?