1
R&S®SMW200A
Flagship vector signal generator (100 kHz – 67 GHz, 2 GHz modulation bandwidth)
- Category: Vector signal generator (flagship)
- Manufacturer: Rohde & Schwarz
- Frequency range (path A): 100 kHz to 67 GHz
- Frequency range (dual path): 100 kHz to 44 GHz
- Modulation bandwidth: 2 GHz RF bandwidth
- Fading bandwidth (with channel simulation): Up to 800 MHz
- MIMO configuration: Up to 8×8 MIMO
- Modulation frequency response: < 0.4 dB (across the 2 GHz bandwidth)
- EVM (5G NR): 0.1%
- EVM (WLAN IEEE 802.11be): -53 dB
- ARB memory (standard): Up to 1 Gsample (expandable to 2 Gsample)
- Internal baseband modules: Up to 2
- RF output expansion (with the SGT100A): Up to 8 RF outputs
- Data sheet: Download PDF
- Product brochure: Download PDF
- External link: Official product page
Product overview
The R&S®SMW200A vector signal generator is the flagship signal generation platform from Rohde & Schwarz. Its modular design gives unmatched flexibility: it can be configured as a single-path vector signal generator or built out into a multichannel MIMO receiver test system. Single-path coverage reaches 67 GHz and dual-path coverage 44 GHz, with modulation bandwidth up to 2 GHz and a built-in channel simulator supporting up to 800 MHz of fading bandwidth and 8×8 MIMO. Outstanding signal quality (EVM 0.1% for 5G NR; –53 dB for WLAN IEEE 802.11be) makes it a fixture in wireless communications, GNSS simulation, radar, satellite communications and aerospace and defense. A built-in graphical waveform monitor and an SCPI macro recorder, with MATLAB®, CVI and Python code templates, substantially shorten test development.
Key features
- Wide coverage: up to 67 GHz on a single path and up to 44 GHz in dual-path configuration, for multiband signal generation
- Outstanding signal quality: EVM of 0.1% for 5G NR signals and –53 dB for WLAN IEEE 802.11be, for precise spectrum and modulation measurements
- Integrated MIMO and fading simulation: up to 8×8 MIMO, a built-in fading simulator with up to 800 MHz of bandwidth, and predefined fading profiles for the major standards
- Ultra low phase noise: a high-end synthesizer architecture as standard, with the optional R&S®SMW-B711/B721 ultra low phase noise options for the most demanding measurements
- Modulation bandwidth up to 2 GHz, through the R&S®SMW-B13XT wideband baseband module and the R&S®SMW-K527 extension, with a modulation frequency response of < 0.4 dB
- Flexible modular architecture: up to 2 internal baseband modules and several fading simulators, expandable to 8 RF outputs using external SGT100A units
- Advanced GNSS and radar simulation: GPS, Galileo, GLONASS, BeiDou and QZSS, with full radar pulse sequencing and multi-target simulation
- Built-in real-time signal monitoring: the graphical interface shows I/Q time domain, spectrum, vector diagram and CCDF, with an SCPI macro recorder and MATLAB®/Python code generators
Typical applications
- Component and base station test for 5G NR, LTE, WCDMA, GSM and other wireless communications standards
- Verification of wireless connectivity standards: WLAN (802.11a/b/g/n/ac/ax/be), Bluetooth 5.x/6.0, LoRa®, NFC
- GNSS receiver simulation and test: GPS, Galileo, GLONASS, BeiDou, NavIC
- Radar signal simulation: pulse sequences, moving targets, multiple emitters and direction finding
- Satellite communications test: DVB-S2/S2X, DVB-RCS2 and low earth orbit (LEO) signal generation
- Aerospace and defense: envelope tracking, digital predistortion (DPD) and Doherty amplifier test
Configure your R&S®SMW200A
Pick a base model and its options, watch your order list build as you go, then send it for a quote in one click. Every order number (Order No.) comes from Rohde & Schwarz factory data.
2
Hardware options
56 options
3
Software options (K-options)
128 options
4
PC software
2 options
5
Accessories
4 optionsAvailable models / variants
The series comes in the 13 variants below. Click “Request a quote” for the full specifications and a quotation for that model from KanTek.
| Model code | Specification differences | |
|---|---|---|
| R&S®SMW-B1003 | RF path A: 100 kHz to 3 GHz | Request a quote → |
| R&S®SMW-B1006 | RF path A: 100 kHz to 6 GHz | Request a quote → |
| R&S®SMW-B1007 | RF path A: 100 kHz to 7.5 GHz | Request a quote → |
| R&S®SMW-B1012 | RF path A: 100 kHz to 12.75 GHz | Request a quote → |
| R&S®SMW-B1020 | RF path A: 100 kHz to 20 GHz | Request a quote → |
| R&S®SMW-B1031 | RF path A: 100 kHz to 31.8 GHz | Request a quote → |
| R&S®SMW-B1040 | RF path A: 100 kHz to 40 GHz | Request a quote → |
| R&S®SMW-B1044 | RF path A: 100 kHz to 44 GHz | Request a quote → |
| R&S®SMW-B1067 | RF path A: 100 kHz to 67 GHz | Request a quote → |
| R&S®SMW-B2003 | RF path B: 100 kHz to 3 GHz | Request a quote → |
| R&S®SMW-B2006 | RF path B: 100 kHz to 6 GHz | Request a quote → |
| R&S®SMW-B2007 | RF path B: 100 kHz to 7.5 GHz | Request a quote → |
| R&S®SMW-B2044 | RF path B: 100 kHz to 44 GHz | Request a quote → |
Frequently asked questions
Yes. KanTek Technology is the authorized Taiwan distributor for Rohde & Schwarz, supplying new R&S®SMW200A instruments with factory quotations and technical advice.
Instrument rental is launching soon. R&S®SMW200A is part of the line-up being prepared, and advance enquiries are welcome.
Yes. KanTek provides calibration and repair for R&S®SMW200A, with calibration performed by a partner laboratory, to keep the instrument accurate and available.
Use Request a quote on this page, or call +886-2-2999-7719. KanTek replies within 24 hours with pricing, lead time and the options that suit your application.
R&S®SMW200A is a Rohde & Schwarz product: Flagship vector signal generator (100 kHz – 67 GHz, 2 GHz modulation bandwidth). Contact KanTek for selection or application advice.
Authorized R&S distributor
Repair and calibration services
Instrument rental, launching soon
Reply within 24 hours
Need R&S®SMW200A pricing, rental or calibration?