1
R&S®SMM100A
Midrange vector signal generator (100 kHz – 44 GHz, 5G NR / Wi-Fi 7)
- Category: Vector signal generator
- Manufacturer: Rohde & Schwarz
- Frequency range: 100 kHz to 44 GHz
- RF modulation bandwidth: Up to 2 GHz (120 MHz in the base model)
- SSB phase noise: < −129 dBc/Hz (1 GHz, 20 kHz offset); typ. −134 dBc/Hz
- EVM (28 GHz, 400 MHz 5G NR): < −45 dB
- EVM (Wi-Fi 7 IEEE 802.11be, 320 MHz): < −53 dB
- ARB memory: 64 Msample (base) up to 2 Gsample (maximum)
- Touchscreen: 8.4 inch touchscreen display
- Interfaces: Structured block diagram interface with real-time graphical signal monitoring
- Data sheet: Download PDF
- Product brochure: Download PDF
- External link: Official product page
Product overview
The R&S®SMM100A is a midrange vector signal generator with excellent RF characteristics across its entire range, 100 kHz to 44 GHz. Internal baseband generation supports up to 2 GHz of RF modulation bandwidth, so it generates wideband digitally modulated signals. It is fully compatible with 5G NR FR1 and FR2 and Wi-Fi 7 (IEEE 802.11be), and covers radar, GNSS, satellite communications, Bluetooth and other wireless standards. An 8.4 inch touchscreen with a structured block diagram interface keeps operation intuitive, on the development bench and on the production floor alike.
Key features
- Frequency range from 100 kHz to 44 GHz — one instrument covering sub-6 GHz through millimeter wave
- Built-in baseband generator with up to 2 GHz of RF modulation bandwidth, for wideband 5G NR FR2 signal simulation
- Excellent SSB phase noise: < −129 dBc/Hz at 1 GHz, 20 kHz offset (typ. −134 dBc/Hz), and −139 dBc/Hz with the low phase noise option
- EVM < −45 dB for a 400 MHz 5G NR signal at 28 GHz and < −53 dB for a 320 MHz Wi-Fi 7 (IEEE 802.11be) signal — industry-leading signal quality
- 8.4 inch touchscreen with a structured block diagram interface and real-time graphical signal monitoring, for a clear, intuitive workflow
- RF linearization (R&S®SMM-K575) improves EVM by up to 8 dB at high output power, for power amplifier test
- Meets the 3GPP TS 38.141 5G NR base station conformance test specification, for Release 15, 16 and 17/18
- ARB memory of up to 2 Gsample for storing long, complex continuous signal sequences
Typical applications
- 5G NR base station conformance test (FR1, FR3 and FR2 bands, per 3GPP TS 38.141)
- Signal quality evaluation for Wi-Fi 7/8 (IEEE 802.11be) and Wi-Fi 6 (IEEE 802.11ax)
- Aerospace, defense and satellite communications (DVB-S2/S2X) signal simulation and verification
- Radar signal simulation and GNSS/GPS receiver test
- IoT wireless standards test: Bluetooth, LoRa, IEEE 802.15.4
- Power amplifier linearization and modulation quality measurement
Configure your R&S®SMM100A
Pick a base model and its options, watch your order list build as you go, then send it for a quote in one click. Every order number (Order No.) comes from Rohde & Schwarz factory data.
2
Hardware options
11 options
3
Software options (K-options)
70 options
4
PC software
1 option
5
Accessories
12 optionsAvailable models / variants
The series comes in the 6 variants below. Click “Request a quote” for the full specifications and a quotation for that model from KanTek.
| Model code | Specification differences | |
|---|---|---|
| R&S®SMM-B1006 | 100 kHz to 6 GHz | Request a quote → |
| R&S®SMM-B1007 | 100 kHz to 7.5 GHz | Request a quote → |
| R&S®SMM-B1012 | 100 kHz to 12.75 GHz | Request a quote → |
| R&S®SMM-B1020 | 100 kHz to 20 GHz | Request a quote → |
| R&S®SMM-B1031 | 100 kHz to 31.8 GHz | Request a quote → |
| R&S®SMM-B1044 | 100 kHz to 44 GHz | Request a quote → |
Frequently asked questions
Yes. KanTek Technology is the authorized Taiwan distributor for Rohde & Schwarz, supplying new R&S®SMM100A instruments with factory quotations and technical advice.
Instrument rental is launching soon. R&S®SMM100A is part of the line-up being prepared, and advance enquiries are welcome.
Yes. KanTek provides calibration and repair for R&S®SMM100A, with calibration performed by a partner laboratory, to keep the instrument accurate and available.
Use Request a quote on this page, or call +886-2-2999-7719. KanTek replies within 24 hours with pricing, lead time and the options that suit your application.
R&S®SMM100A is a Rohde & Schwarz product: Midrange vector signal generator (100 kHz – 44 GHz, 5G NR / Wi-Fi 7). Contact KanTek for selection or application advice.
Authorized R&S distributor
Repair and calibration services
Instrument rental, launching soon
Reply within 24 hours
Need R&S®SMM100A pricing, rental or calibration?