1
R&S®SMA100B
RF and microwave signal generator (8 kHz – 67 GHz, extendable to 170 GHz)
- Category: Analog signal generator
- Manufacturer: Rohde & Schwarz
- Frequency range: 8 kHz to 3 / 6 / 12.75 / 20 / 31.8 / 40 / 50 / 67 GHz
- Frequency overrange: Up to 72 GHz
- Frequency extension (with upconverter): 50 to 170 GHz
- SSB phase noise (typ., 10 GHz / 10 kHz offset): –132 dBc/Hz
- Wideband noise (meas., 10 GHz / 30 MHz offset): –162 dBc/Hz
- Maximum output power: > 30 dBm
- Data sheet: Download PDF
- Product brochure: Download PDF
- External link: Official product page
Product overview
The R&S®SMA100B RF and microwave signal generator delivers performance without compromise: the purest output signals in its class while holding maximum output power and extremely low harmonic distortion, ahead of the competition across the board. As the world's leading signal generator it takes on the most demanding module and system test tasks in the RF semiconductor, wireless communications and aerospace and defense industries.
Key features
- Frequency range: 8 kHz to 3 / 6 / 12.75 / 20 / 31.8 / 40 / 50 and 67 GHz, extendable to 170 GHz with an upconverter
- Best single sideband phase noise in the industry: –132 dBc/Hz (typ., 10 GHz, 10 kHz offset)
- Outstanding wideband noise: –162 dBc/Hz (meas., 10 GHz, 30 MHz offset)
- Maximum output power exceeding +30 dBm across wide frequency ranges
- Exceptionally low harmonic distortion, for industry-leading signal purity
- High dynamic range, uninterrupted level sweep (with the R&S®SMAB-K724 option)
- User correction (UCOR), closed-loop power control and other versatile functions
- Modern graphical user interface with a touchscreen for intuitive operation
- R&S®LegacyPro emulation of earlier signal generators, protecting the investment in existing test programs
Typical applications
- RF semiconductor test (amplifier gain, ADC/DAC characterization)
- Wireless communications development and verification
- Aerospace and defense radar and electronic warfare system test
- Characterization of microwave modules and subsystems
- Evaluation of phase noise sensitive receivers and oscillators
Configure your R&S®SMA100B
Pick a base model and its options, watch your order list build as you go, then send it for a quote in one click. Every order number (Order No.) comes from Rohde & Schwarz factory data.
2
Hardware options
52 options
3
Software options (K-options)
1 option
4
PC software
2 options
5
Accessories
8 optionsAvailable models / variants
The series comes in the 11 variants below. Click “Request a quote” for the full specifications and a quotation for that model from KanTek.
| Model code | Specification differences | |
|---|---|---|
| R&S®SMAB-B103 | 8 kHz to 3 GHz | Request a quote → |
| R&S®SMAB-B106 | 8 kHz to 6 GHz | Request a quote → |
| R&S®SMAB-B112 | 8 kHz to 12.75 GHz | Request a quote → |
| R&S®SMAB-B120 | 8 kHz to 20 GHz | Request a quote → |
| R&S®SMAB-B131 | 8 kHz to 31.8 GHz | Request a quote → |
| R&S®SMAB-B140 | 8 kHz to 40 GHz | Request a quote → |
| R&S®SMAB-B140N | 8 kHz to 40 GHz (restricted minimum pulse width) | Request a quote → |
| R&S®SMAB-B150 | 8 kHz to 50 GHz | Request a quote → |
| R&S®SMAB-B150N | 8 kHz to 50 GHz (restricted minimum pulse width) | Request a quote → |
| R&S®SMAB-B167 | 8 kHz to 67 GHz | Request a quote → |
| R&S®SMAB-B167N | 8 kHz to 67 GHz (restricted minimum pulse width) | Request a quote → |
Frequently asked questions
Yes. KanTek Technology is the authorized Taiwan distributor for Rohde & Schwarz, supplying new R&S®SMA100B instruments with factory quotations and technical advice.
Instrument rental is launching soon. R&S®SMA100B is part of the line-up being prepared, and advance enquiries are welcome.
Yes. KanTek provides calibration and repair for R&S®SMA100B, with calibration performed by a partner laboratory, to keep the instrument accurate and available.
Use Request a quote on this page, or call +886-2-2999-7719. KanTek replies within 24 hours with pricing, lead time and the options that suit your application.
R&S®SMA100B is a Rohde & Schwarz product: RF and microwave signal generator (8 kHz – 67 GHz, extendable to 170 GHz). Contact KanTek for selection or application advice.
Authorized R&S distributor
Repair and calibration services
Instrument rental, launching soon
Reply within 24 hours
Need R&S®SMA100B pricing, rental or calibration?