1
R&S®ZNA
Flagship vector network analyzer (10 MHz – 67 GHz)
- Category: Vector network analyzer (flagship)
- Manufacturer: Rohde & Schwarz
- Frequency range: 10 MHz – 26.5 GHz (ZNA26) / 43.5 GHz (ZNA43) / 50 GHz (ZNA50) / 67 GHz (ZNA67) / 110 GHz (ZNA67EXT)
- Test ports: 2 ports or 4 ports (model dependent)
- System dynamic range: > 129 dB (specified, base model); 147 dB (typ., with option B3); up to 170 dB maximum, while still allowing a full two-port calibration
- Sensitivity (noise floor): > −120 dBm (1 Hz IF bandwidth, specified); −162 dBm (1 Hz IF bandwidth, measured, with the optional LNA)
- Trace noise (magnitude, RMS): 0.005 dB (specified, RMS); 0.002 dB (typ., RMS) at 10 GHz, 100 kHz measurement bandwidth, 0 dB reflection
- Output power range: −80 dBm to +17 dBm (ZNA26, 10 MHz–4 GHz); down to −120 dBm with the optional step attenuator
- Output power accuracy: < 2.0 dB (ZNA26/43, 10 MHz–26.5 GHz, −10 dBm power)
- Power sweep range: 100 dB (typ., continuous electronic sweep)
- IF measurement bandwidth: 1 Hz – 1.5 MHz (base model); 1 Hz – 30 MHz (with option K17)
- Measurement speed: < 2.5 ms (201 points, 10 GHz center frequency, 200 MHz span, 1 MHz measurement bandwidth); 96 ms (1601 points, full 10 MHz–43.5 GHz range, 500 kHz bandwidth, two-port calibration)
- Frequency resolution: 1 Hz
- Measurement points: 1 – 100001 points
- Port impedance: 50 Ω
- Main display: 12.1" touchscreen, WXGA 1280×800, 18-bit colour LCD
- Secondary display: 7" touchscreen, WVGA 480×800, 18-bit colour LCD
- Internal computer: AMD R2000, 3.35–3.7 GHz, 16 GB DDR4, ≥256 GB SSD, Windows 11 IoT Enterprise 2024 LTSC
- Dimensions (W x H x D): 461.4 mm × 284.6 mm × 462.1 mm (18.2" × 11.2" × 18.2"), EIA 6U
- Weight: 24 kg (two-port models); 29 kg (four-port models)
- Data sheet: Download PDF
- Product brochure: Download PDF
- External link: Official product page
Product overview
The R&S®ZNA is the flagship of the Rohde & Schwarz VNA portfolio, and it masters the most challenging measurement tasks by combining excellent RF performance with deep software capability and a hardware architecture no other analyzer has. A DUT-centric approach and unique touch-only operation across two independent touchscreens make it a powerful, versatile and compact system for characterizing passive and active components alike. System dynamic range exceeds 129 dB as specified and reaches 170 dB with options, with sensitivity better than −120 dBm in a 1 Hz IF bandwidth. Frequency extension kits take the measurement range to 1.1 THz through the R&S®ZVA-Z and R&S®ZC converter families.
Key features
- Dynamic range above 129 dB as specified, 147 dB typical with the B3 third/fourth internal source option and up to 170 dB at maximum while a full two-port calibration remains possible — enough to characterize high-blocking passive and active devices accurately
- Trace noise down to 0.005 dB RMS specified and 0.002 dB RMS typical, with group delay trace noise falling from 200 ps to 15 ps peak-to-peak with option K9, for stable, repeatable results
- Four-port models carry up to four phase-coherent, independently configurable internal sources with pulse modulators, so mixers, frequency converters, phased array antennas and active load pull need no external generator
- Two independent touchscreens (12.1" main plus 7" secondary) and a DUT-centric approach, with multitouch gestures throughout a genuinely touch-only interface
- Leading measurement speed: < 2.5 ms for 201 points in a 1 MHz measurement bandwidth, and frequency extension to 1.1 THz through the R&S®ZVA-Z and R&S®ZC converter families
- Removable internal computer (AMD R2000, Windows 11 IoT Enterprise 2024 LTSC) for smooth firmware upgrades, with IEC/IEEE-488, LAN (1 Gbit/s) and USB remote control
- Winner of Best Test and Measurement Product at the Electronics Industry Awards 2020
Typical applications
- Characterizing millimeterwave components and subsystems: 5G NR FR2, satellite communications and aerospace radar above 26.5 GHz, including on-wafer measurements to 110 GHz
- Full mixer and frequency converter characterization: scalar and vector-corrected converter measurements (options K4/K5), group delay and phase linearity analysis, intermodulation (IM) measurements, up into the THz range
- Signal integrity and high-speed digital interface test: PCIe 5.0/6.0 and IEEE 802.3 high-speed Ethernet compliance measurements, time domain analysis (TDR/TDT) and eye diagrams (option K20), fixture de-embedding (K210/K220/K230)
- Phased array (AESA) and beamforming verification: control of four phase-coherent sources (option K6) with arbitrary phase and amplitude, for transmit/receive modules and 5G small cell verification
- Amplifier characterization: noise figure measurements to 67 GHz (option K30), large-signal compression point testing, harmonic distortion analysis and active load pull on high-power amplifiers
- Pulsed signal measurements (option K7): minimum pulse width 40 ns with timing diagram visualization, for radar components, T/R modules and pulsed amplifier characterization
- Sub-THz on-wafer measurements: 6G communications and sensing research, with differential RF measurements to 110 GHz on amplifiers, mixers and differential transmission lines
Configure your R&S®ZNA
Pick a base model and its options, watch your order list build as you go, then send it for a quote in one click. Every order number (Order No.) comes from Rohde & Schwarz factory data.
2
Hardware options
97 options
3
Software options (K-options)
24 options
4
Accessories
10 optionsAvailable models / variants
This series comes in the 11 model variants below. Click Request a quote to ask KanTek for the full specifications and a price for the model you need.
| Model | Specification | |
|---|---|---|
| R&S®ZNA26 (1332.4500.22) | 26.5 GHz / 2 / 3.5 mm (m) | Request a quote → |
| R&S®ZNA26 (1332.4500.24) | 26.5 GHz / 4 / 3.5 mm (m) | Request a quote → |
| R&S®ZNA43 (1332.4500.42) | 43.5 GHz / 2 / 2.92 mm (m) | Request a quote → |
| R&S®ZNA43 (1332.4500.43) | 43.5 GHz / 2 / 2.4 mm (m) | Request a quote → |
| R&S®ZNA43 (1332.4500.44) | 43.5 GHz / 4 / 2.92 mm (m) | Request a quote → |
| R&S®ZNA43 (1332.4500.45) | 43.5 GHz / 4 / 2.4 mm (m) | Request a quote → |
| R&S®ZNA50 (1332.4500.52) | 50 GHz / 2 / 2.4 mm (m) | Request a quote → |
| R&S®ZNA50 (1332.4500.54) | 50 GHz / 4 / 2.4 mm (m) | Request a quote → |
| R&S®ZNA67 (1332.4500.62) | 67 GHz / 2 / 1.85 mm (m) | Request a quote → |
| R&S®ZNA67 (1332.4500.64) | 67 GHz / 4 / 1.85 mm (m) | Request a quote → |
| R&S®ZNA67EXT (1352.1888.xx) | 110 GHz / 2 or 4 / 1.0 mm (m) | Request a quote → |
Frequently asked questions
Yes. KanTek Technology is the authorized Taiwan distributor for Rohde & Schwarz, supplying new R&S®ZNA instruments with factory quotations and technical advice.
Instrument rental is launching soon. R&S®ZNA is part of the line-up being prepared, and advance enquiries are welcome.
Yes. KanTek provides calibration and repair for R&S®ZNA, with calibration performed by a partner laboratory, to keep the instrument accurate and available.
Use Request a quote on this page, or call +886-2-2999-7719. KanTek replies within 24 hours with pricing, lead time and the options that suit your application.
R&S®ZNA is a Rohde & Schwarz product: Flagship vector network analyzer (10 MHz – 67 GHz). Contact KanTek for selection or application advice.
Authorized R&S distributor
Repair and calibration services
Instrument rental, launching soon
Reply within 24 hours
Need R&S®ZNA pricing, rental or calibration?