1
R&S®FSWP
Phase noise analyzer and VCO tester (1 MHz – 50 GHz)
- Category: Phase noise analyzer
- Manufacturer: Rohde & Schwarz
- Frequency range (FSWP8): 1 MHz – 8 GHz
- Frequency range (FSWP26): 1 MHz – 26.5 GHz
- Frequency range (FSWP50): 1 MHz – 50 GHz
- Frequency range (with external mixer extension): up to 325 GHz
- Phase noise floor: < –166 dBc/Hz (1 GHz, 10 kHz offset)
- Analysis bandwidth (standard): up to 320 MHz
- Analysis bandwidth (B80 option): 80 MHz
- Analysis bandwidth (B8E option): 40 MHz
- Maximum offset frequency (phase noise): 30 MHz
- Transient analysis bandwidth: up to 8 GHz
- Internal source frequency (residual phase noise measurements): up to 54 GHz
- Minimum offset frequency for Allan variance: 1 μHz
- Maximum averaging time for Allan variance: 1,000,000 s
- Cross-correlation: Supported (simultaneous amplitude and phase noise measurement)
- Data sheet: Download PDF
- Product brochure: Download PDF
- External link: Official product page
Product overview
The R&S®FSWP is a high-sensitivity phase noise analyzer that combines very low noise internal sources with cross-correlation, so the phase and amplitude noise of a stable source such as a radar oscillator is measured in seconds. Spectrum analysis, vector signal analysis and VCO characterization sit on the same platform, and external mixers take the frequency range up to 325 GHz — for demanding aerospace, defense, communications and radar work.
Key features
- Cross-correlation: highly sensitive, simultaneous amplitude and phase noise measurement on CW and pulsed signals
- Fastest measurement speed in its class: hardware-accelerated signal processing gives real-time phase noise results with the fewest cross-correlations
- Unrivaled sensitivity: the internal low noise sources outperform most commercial signal generators on the market
- Pulsed signal analysis: automatic pulse parameter detection, supporting phase noise measurements on radar sources
- Automated VCO characterization: frequency, power, tuning slope and phase noise against tuning voltage
- Residual phase noise measurement: measure the noise a component adds, driven by an internal or external source, under realistic operating conditions
- Allan variance: frequency stability figures calculated directly from the phase noise data
- One instrument, many functions: spectrum analysis, vector signal analysis and transient measurements in the same box
- Frequency extension to 325 GHz: millimeterwave measurements with the FS-Z family of external mixers
Typical applications
- Verification of radar system signal sources
- Testing DROs (dielectric resonator oscillators) and OCXOs (oven-controlled crystal oscillators)
- VCO characterization during component development
- Characterizing pulsed signal sources for military and aerospace use
- Additive (residual) phase noise measurements on components
- PLL transient response analysis
Configure your R&S®FSWP
Pick a base model and its options, watch your order list build as you go, then send it for a quote in one click. Every order number (Order No.) comes from Rohde & Schwarz factory data.
2
Hardware options
15 options
3
Software options (K-options)
16 options
4
PC software
24 options
5
Accessories
15 optionsAvailable models / variants
This series comes in the 3 model variants below. Click Request a quote to ask KanTek for the full specifications and a price for the model you need.
| Model | Specification | |
|---|---|---|
| R&S®FSWP8 (1322.8003.09) | 1 MHz – 8 GHz / < –166 dBc/Hz @ 1 GHz, 10 kHz offset | Request a quote → |
| R&S®FSWP26 (1322.8003.27) | 1 MHz – 26.5 GHz / < –166 dBc/Hz @ 1 GHz, 10 kHz offset | Request a quote → |
| R&S®FSWP50 (1322.8003.51) | 1 MHz – 50 GHz / < –166 dBc/Hz @ 1 GHz, 10 kHz offset | Request a quote → |
Frequently asked questions
Yes. KanTek Technology is the authorized Taiwan distributor for Rohde & Schwarz, supplying new R&S®FSWP instruments with factory quotations and technical advice.
Instrument rental is launching soon. R&S®FSWP is part of the line-up being prepared, and advance enquiries are welcome.
Yes. KanTek provides calibration and repair for R&S®FSWP, with calibration performed by a partner laboratory, to keep the instrument accurate and available.
Use Request a quote on this page, or call +886-2-2999-7719. KanTek replies within 24 hours with pricing, lead time and the options that suit your application.
R&S®FSWP is a Rohde & Schwarz product: Phase noise analyzer and VCO tester (1 MHz – 50 GHz). Contact KanTek for selection or application advice.
Authorized R&S distributor
Repair and calibration services
Instrument rental, launching soon
Reply within 24 hours
Need R&S®FSWP pricing, rental or calibration?