1
R&S®MXO 5C series
Compact 4/8-channel platform oscilloscope
- Category: Oscilloscopes
- Manufacturer: Rohde & Schwarz
- Bandwidth: 100 MHz – 2 GHz
- Channels: 4 / 8 analog channels
- ADC resolution: 12-bit (18-bit in HD mode)
- Acquisition memory: 500 Mpoints/ch standard, upgradeable to 1 Gpoint
- Acquisition rate: up to 4.5 million waveforms/s
- Form factor: 2U compact housing (no front panel display; integrated e-ink status screen)
- Data sheet: Download PDF
- Product brochure: Download PDF
- External link: Official product page
Product overview
The R&S®MXO 5C is the compact member of the MXO 5 series. It uses the same core building blocks but drops the front panel display in favour of a 2U rack height and a low-power e-ink status screen, which makes it a fit for automated test equipment (ATE), rack integration and dense multi-channel applications. It is available with 4 or 8 channels and bandwidths from 100 MHz to 2 GHz, offers the industry-leading acquisition rate of 4.5 million waveforms per second, and is operated remotely over LAN through a web browser and a virtual front panel.
Key features
- 12-bit ADC resolution, with 18-bit vertical resolution in HD mode
- 500 Mpoints of standard memory depth per channel (upgradeable to 1 Gpoint)
- Industry-leading waveform acquisition rate of 4.5 million per second
- Spectrum analysis at 50,000 FFT/s
- Zone trigger on analog, spectrum and math waveforms
- The 8-channel model needs only 1500 cm³ and 23 W per channel
- LAN remote operation through a built-in web browser and virtual front panel
Typical applications
- Automated test equipment (ATE) and rack-integrated test platforms
- Synchronous analysis of many signals at high channel density
- Power integrity and three-phase power measurement
- Serial bus debugging and compliance testing (automotive, aerospace, MIPI, USB, Ethernet)
- Benchtop multi-channel applications where vertical space matters
Configure your R&S®MXO 5C Series
Pick a base model and its options, watch your order list build as you go, then send it for a quote in one click. Every order number (Order No.) comes from Rohde & Schwarz factory data.
2
Hardware options
12 options
3
Software options (K-options)
18 options
4
Probes
34 options
5
PC software
2 options
6
Accessories
9 optionsAvailable models / variants
This series comes in the following 8 variants. Click “Request a quote” to ask KanTek for the full specifications and pricing of the model you need.
| Model code | Specification differences | |
|---|---|---|
| MXO5C-4ch | 4-channel compact model | Request a quote → |
| MXO5C-8ch | 8-channel compact model | Request a quote → |
| MXO5C-B405 | 4 channels / 500 MHz | Request a quote → |
| MXO5C-B410 | 4 channels / 1 GHz | Request a quote → |
| MXO5C-B420 | 4 channels / 2 GHz | Request a quote → |
| MXO5C-B805 | 8 channels / 500 MHz | Request a quote → |
| MXO5C-B810 | 8 channels / 1 GHz | Request a quote → |
| MXO5C-B820 | 8 channels / 2 GHz | Request a quote → |
Frequently asked questions
Yes. KanTek Technology is the authorized Taiwan distributor for Rohde & Schwarz, supplying new R&S®MXO 5C Series instruments with factory quotations and technical advice.
Instrument rental is launching soon. R&S®MXO 5C Series is part of the line-up being prepared, and advance enquiries are welcome.
Yes. KanTek provides calibration and repair for R&S®MXO 5C Series, with calibration performed by a partner laboratory, to keep the instrument accurate and available.
Use Request a quote on this page, or call +886-2-2999-7719. KanTek replies within 24 hours with pricing, lead time and the options that suit your application.
R&S®MXO 5C Series is a Rohde & Schwarz product: Compact 4/8-channel platform oscilloscope. Contact KanTek for selection or application advice.
Authorized R&S distributor
Repair and calibration services
Instrument rental, launching soon
Reply within 24 hours
Need R&S®MXO 5C Series pricing, rental or calibration?