1
R&S®SMCV100B
Vector signal generator (multistandard platform, 4 kHz – 7.125 GHz)
- Category: Vector signal generator
- Manufacturer: Rohde & Schwarz
- Frequency range: 4 kHz to 7.125 GHz
- Maximum output power: +25 dBm
- Modulation bandwidth: Up to 240 MHz
- Touchscreen: 5 inch
- ARB memory: Up to 1 GSample (expandable)
- Base frequency options: 4 kHz to 3 GHz (R&S®SMCVB-B103), extendable to 6 GHz or 7.125 GHz
- Supported standards: 5G NR, LTE, GSM/EDGE, Wi-Fi 802.11 a/b/g/n/ac/ax/be, Bluetooth® 5.x, GNSS, DVB, DAB, ATSC 3.0, DRM and more
- Data sheet: Download PDF
- Product brochure: Download PDF
- External link: Official product page
Product overview
The R&S®SMCV100B is the industry's first multistandard platform vector signal generator, bringing automotive, broadcast, navigation and wireless communications capability together in one instrument. Its software-defined architecture is exceptionally flexible: communications standards are unlocked through optional software modules, covering 5G NR, LTE, Wi-Fi 6E/7, Bluetooth® 5.x, multi-constellation GNSS simulation and broadcast standards such as DAB, DVB-T2, ATSC 3.0 and DRM. It spans 4 kHz to 7.125 GHz with up to +25 dBm output power and up to 240 MHz modulation bandwidth, and its 5 inch touchscreen suits everything from laboratory development to the production line.
Key features
- Multistandard software-defined architecture: add support for further communications standards through optional software modules, with no hardware change
- Wide frequency coverage: 4 kHz to 7.125 GHz (with the extension options), from low frequencies up into the microwave range
- High output power: up to +25 dBm, for RF chain testing over a wide dynamic range
- Wide modulation bandwidth: up to 240 MHz RF bandwidth, for wideband 5G NR FR1 and Wi-Fi 6/6E signal generation
- Large ARB memory: up to 1 GSample, enough for long sequences or composite multistandard waveforms
- Multi-constellation GNSS simulation: GPS, Galileo, GLONASS, BeiDou and NavIC, expandable to multi-satellite scenarios
- 5 inch touchscreen: an intuitive interface that speeds up test setup
- Low phase noise option (R&S®SMCVB-K709) for measurements that demand high spectral purity
Typical applications
- Automotive electronics test: V2X communications (IEEE 802.11p), in-car navigation (GNSS), infotainment (DAB/FM) and in-car connectivity (Wi-Fi, Bluetooth) verification
- Broadcast signal simulation: AM/FM/RDS, DAB/T-DMB, DRM, DVB-T/T2, ATSC 3.0, ISDB-T and DTMB signal generation and receiver test
- Mobile communications test: verification and production test of 5G NR (Release 16/17/18), LTE, GSM/EDGE and cellular IoT devices
- Wireless connectivity test: Wi-Fi 802.11 a/b/g/n/ac/ax/be (Wi-Fi 6/6E/7), Bluetooth® EDR/5.x, NFC and LoRa modules and systems
- Satellite communications: DVB-S/S2/S2X and DVB-RCS2 satellite signal simulation and receiver test
- EMC and regulatory test: generation of known interference signals for electromagnetic compatibility verification and for calibrating measuring equipment
Configure your R&S®SMCV100B
Pick a base model and its options, watch your order list build as you go, then send it for a quote in one click. Every order number (Order No.) comes from Rohde & Schwarz factory data.
2
Hardware options
8 options
3
Software options (K-options)
88 options
4
PC software
1 option
5
Accessories
7 optionsAvailable models / variants
The series comes in the 3 variants below. Click “Request a quote” for the full specifications and a quotation for that model from KanTek.
| Model code | Specification differences | |
|---|---|---|
| R&S®SMCVB-B103 (1433.2002.02) | Base model, frequency range 4 kHz to 3 GHz | Request a quote → |
| R&S®SMCVBKB106 (1433.2202.02) | Frequency extended to 6 GHz | Request a quote → |
| R&S®SMCVBKB107 (1433.2402.02) | Frequency extended to 7.125 GHz | Request a quote → |
Frequently asked questions
Yes. KanTek Technology is the authorized Taiwan distributor for Rohde & Schwarz, supplying new R&S®SMCV100B instruments with factory quotations and technical advice.
Instrument rental is launching soon. R&S®SMCV100B is part of the line-up being prepared, and advance enquiries are welcome.
Yes. KanTek provides calibration and repair for R&S®SMCV100B, with calibration performed by a partner laboratory, to keep the instrument accurate and available.
Use Request a quote on this page, or call +886-2-2999-7719. KanTek replies within 24 hours with pricing, lead time and the options that suit your application.
R&S®SMCV100B is a Rohde & Schwarz product: Vector signal generator (multistandard platform, 4 kHz – 7.125 GHz). Contact KanTek for selection or application advice.
Authorized R&S distributor
Repair and calibration services
Instrument rental, launching soon
Reply within 24 hours
Need R&S®SMCV100B pricing, rental or calibration?