1
R&S®ESRP
EMI test receiver (9 kHz to 7 GHz, CISPR 16-1-1 / MIL-STD-461 / DO-160)
- Category: EMI test receiver
- Manufacturer: Rohde & Schwarz
- Frequency range: 9 kHz to 3.6 GHz (ESRP3) / 9 kHz to 7 GHz (ESRP7); optionally extendable down to 10 Hz
- CISPR 16-1-1 resolution bandwidths: 200 Hz, 9 kHz, 120 kHz, 1 MHz
- MIL-STD-461 / DO-160 resolution bandwidths: 10 Hz, 100 Hz, 1 kHz, 10 kHz, 100 kHz, 1 MHz
- Detectors: Quasi-peak (QP), CISPR average, RMS average, peak (PK+)
- Compliance standards: CISPR 16-1-1, MIL-STD-461, DO-160
- Data sheet: Download PDF
- Product brochure: Download PDF
- External link: Official product page
Product overview
The R&S®ESRP is a multi-standard EMI test receiver designed to satisfy commercial (CISPR 16-1-1), aerospace (DO-160) and military (MIL-STD-461) requirements at the same time. The ESRP3 covers 9 kHz to 3.6 GHz and the ESRP7 extends to 7 GHz, and both carry the full set of CISPR and MIL-STD compatible resolution bandwidths. The optional ESRP-B2 preselection and preamplifier noticeably improve sensitivity and measurement accuracy, while rugged housing (FSV-B1) and a battery pack (FSV-B32) give the ESRP field capability for measuring outside a shielded room. The balance it strikes between performance and cost makes it a sound choice for a mid-size EMC laboratory or an avionics test house.
Key features
- Meets CISPR 16-1-1, MIL-STD-461 and DO-160 simultaneously: one instrument from commercial to aerospace measurement
- CISPR 16-1-1 resolution bandwidths of 200 Hz, 9 kHz, 120 kHz and 1 MHz; six MIL-STD bandwidths from 10 Hz to 1 MHz
- Four built-in detectors: quasi-peak (QP), CISPR average, RMS average and peak (PK+)
- Optional ESRP-B2 preselection and RF preamplifier, for better sensitivity and selectivity
- Optional low-frequency extension down to 10 Hz (ESRP-B29), for very low frequency interference
- Rugged housing (FSV-B1) and a lithium battery pack (FSV-B32) support field and mobile measurement
- Time domain scan (K53) raises scan speed substantially and shortens the compliance test cycle
- IF analysis (K56) gives a spectrum view of the IF domain, for characterizing interference
Typical applications
- DO-160 conducted susceptibility and radiated emission measurement on avionics
- MIL-STD-461 EMI compliance testing on military platforms, CE102, RE102 and other test items
- CISPR 16-1-1 conducted interference testing of industrial and consumer electronics, in the CISPR A/B bands
- On-site EMC diagnosis, with the battery pack and rugged housing for mobile measurement
- Spectral purity assessment of satellite ground systems and radar equipment
Configure your R&S®ESRP
Pick a base model and its options, watch your order list build as you go, then send it for a quote in one click. Every order number (Order No.) comes from Rohde & Schwarz factory data.
2
Hardware options
11 options
3
Software options (K-options)
2 optionsAvailable models / variants
This series comes in the 2 models / configurations below. Click Request a quote to ask KanTek for the full specifications and a price for the model you need.
| Model | Specification | |
|---|---|---|
| R&S®ESRP3 (1316.4500.03) (1316.4500.03) | Frequency range: 9 kHz to 3.6 GHz | Request a quote → |
| R&S®ESRP7 (1316.4500.07) (1316.4500.07) | Frequency range: 9 kHz to 7 GHz | Request a quote → |
Frequently asked questions
Yes. KanTek Technology is the authorized Taiwan distributor for Rohde & Schwarz, supplying new R&S®ESRP instruments with factory quotations and technical advice.
Instrument rental is launching soon. R&S®ESRP is part of the line-up being prepared, and advance enquiries are welcome.
Yes. KanTek provides calibration and repair for R&S®ESRP, with calibration performed by a partner laboratory, to keep the instrument accurate and available.
Use Request a quote on this page, or call +886-2-2999-7719. KanTek replies within 24 hours with pricing, lead time and the options that suit your application.
R&S®ESRP is a Rohde & Schwarz product: EMI test receiver (9 kHz to 7 GHz, CISPR 16-1-1 / MIL-STD-461 / DO-160). Contact KanTek for selection or application advice.
Authorized R&S distributor
Repair and calibration services
Instrument rental, launching soon
Reply within 24 hours
Need R&S®ESRP pricing, rental or calibration?