1
R&S®EPL
Portable EMI test receiver (5 kHz to 7.125 GHz, in line with CISPR 16-1-1)
- Category: EMI test receiver, portable
- Manufacturer: Rohde & Schwarz
- Frequency range: 5 kHz to 30 MHz (EPL1000) / 1 GHz (EPL1001, upgradeable) / 7.125 GHz (EPL1007)
- Detectors: CISPR compliant detectors: quasi-peak, average, peak
- Compliance standards: CISPR 16-1-1; CISPR 14-1 ed. 6/7 with the 4-channel option
- Form factor: Portable, for pre-compliance testing on site
- Data sheet: Download PDF
- Product brochure: Download PDF
- External link: Official product page
Product overview
The R&S®EPL is a portable EMI test receiver from Rohde & Schwarz for pre-compliance and compliance testing and for measuring on site, with a choice of frequency ranges from 5 kHz up to 7.125 GHz. The EPL1000 concentrates on low-frequency conducted interference to 30 MHz, the EPL1001 extends to 1 GHz and can be upgraded to 7.125 GHz, and the EPL1007 covers the full CISPR range outright. Every model is in line with CISPR 16-1-1 and carries the CISPR compliant set of detectors; with the time domain scan option (K53) scanning becomes much faster, so an engineer can spot a potential EMI problem while the design is still open. The optional 4-channel click rate analysis (K59) covers CISPR 14-1 household appliance EMI measurement. A small housing and a direct user interface make the EPL the measuring instrument a development engineer will carry around.
Key features
- Portable and small enough to take out of the laboratory for on-site pre-compliance work and quick EMI scans
- Three frequency models: 30 MHz (EPL1000), 1 GHz (EPL1001) and 7.125 GHz (EPL1007) — buy what you need
- The EPL1001 can be upgraded to 7.125 GHz in the field, protecting the initial investment and leaving room to grow
- In line with CISPR 16-1-1, with CISPR quasi-peak, average and peak detectors built in
- The time domain scan option (K53) uses CISPR band related step sizes to cut scan time substantially
- The real-time spectrogram (K55E) gives a live spectrum view that shows up intermittent interference quickly
- 4-channel click rate analysis (K59) covers CISPR 14-1 ed. 6/7 appliance EMI testing
- Optional preselection and preamplifier (B2) raise sensitivity for tighter measurement requirements
Typical applications
- Quick pre-compliance EMI scans during product design, finding and fixing interference early
- CISPR 14-1 click rate measurement on household appliances, with the K59 option
- CISPR 32 / EN 55032 conducted interference pre-testing of information technology equipment
- Locating interference sources and troubleshooting on the factory floor
- The portable instrument for an EMC compliance engineer, complementing work at a certification laboratory
Configure your R&S®EPL
Pick a base model and its options, watch your order list build as you go, then send it for a quote in one click. Every order number (Order No.) comes from Rohde & Schwarz factory data.
2
Hardware options
9 options
3
Software options (K-options)
7 options
4
Accessories
1 optionAvailable models / variants
This series comes in the 3 models / configurations below. Click Request a quote to ask KanTek for the full specifications and a price for the model you need.
| Model | Specification | |
|---|---|---|
| R&S®EPL1000 (1350.4444.10) (1350.4444.10) | Frequency range: 5 kHz to 30 MHz | Request a quote → |
| R&S®EPL1001 (1350.4444.11) (1350.4444.11) | Frequency range: 5 kHz to 1 GHz, upgradeable to 7.125 GHz | Request a quote → |
| R&S®EPL1007 (1350.4444.17) (1350.4444.17) | Frequency range: 5 kHz to 7.125 GHz | Request a quote → |
Frequently asked questions
Yes. KanTek Technology is the authorized Taiwan distributor for Rohde & Schwarz, supplying new R&S®EPL instruments with factory quotations and technical advice.
Instrument rental is launching soon. R&S®EPL is part of the line-up being prepared, and advance enquiries are welcome.
Yes. KanTek provides calibration and repair for R&S®EPL, with calibration performed by a partner laboratory, to keep the instrument accurate and available.
Use Request a quote on this page, or call +886-2-2999-7719. KanTek replies within 24 hours with pricing, lead time and the options that suit your application.
R&S®EPL is a Rohde & Schwarz product: Portable EMI test receiver (5 kHz to 7.125 GHz, CISPR 16-1-1 compliant). Contact KanTek for selection or application advice.
Authorized R&S distributor
Repair and calibration services
Instrument rental, launching soon
Reply within 24 hours
Need R&S®EPL pricing, rental or calibration?