1
R&S®NGL200 series
Two-quadrant linear DC power supply that also sinks current (up to 120 W)
- Category: Power supply
- Manufacturer: Rohde & Schwarz
- Output channels: 1 (NGL201) / 2 (NGL202)
- Output voltage: 0 V to 20 V per channel
- Output current: 0 A to 6 A at ≤6 V; 0 A to 3 A above 6 V, per channel
- Maximum output power: 60 W per channel (120 W in total on the NGL202)
- Quadrants: Two quadrants (sources and sinks current)
- Voltage ripple and noise: < 500 µV RMS, < 2 mV pk-pk (20 Hz to 20 MHz)
- Current ripple: < 1 mA RMS
- Load recovery time: < 30 µs (within ±20 mV of the set voltage)
- Voltage programming resolution: 1 mV
- Current programming resolution: 0.1 mA
- Voltage readback resolution: 10 µV (6½ digits)
- Current readback resolution: 10 µA (6½ digits)
- Voltage readback accuracy: ±(0.02% + 2 mV)
- Current readback accuracy: ±(0.05% + 250 µA)
- Display: 5" TFT touchscreen (800 × 480)
- Standard interfaces: USB, LAN (VXI-11); WLAN and GPIB optional
- Protection functions: OVP, OCP, OPP, OTP and an electronic fuse
- Dimensions (W x H x D): 222 mm × 97 mm × 436 mm
- Data sheet: Download PDF
- Product brochure: Download PDF
- External link: Official product page
Overview
The R&S®NGL200 series is a two-quadrant linear DC power supply that works both as a source and as a sink, absorbing current flowing back from the load. That makes it a natural fit for simulating batteries and for charge/discharge testing. Its load recovery time of less than 30 µs reproduces the abrupt current swings of a mobile device or IoT module switching between sleep and transmit mode while holding the output voltage steady. With 6½ digit measurement of voltage, current and power plus data logging, the instrument is a precision current analyzer as much as a supply — at home in mobile communications, IoT and battery development laboratories.
Key features
- Two-quadrant architecture switches automatically between source and sink mode, so it behaves like a real battery
- Load recovery time < 30 µs (within ±20 mV), matching the instantaneous load steps of a mobile or IoT device moving between sleep and transmit
- 6½ digit readback of voltage, current and power measures µA-level standby current and A-level inrush without changing range
- Very low ripple and noise: voltage < 500 µV RMS and < 2 mV pk-pk, current < 1 mA RMS, for sensitive analog circuits
- Linear regulation avoids the high-frequency interference a switched-mode supply couples into the DUT
- 5" colour touchscreen with a rotary knob and a graphical, intuitive interface
- Built-in high-speed data logging records voltage, current and power over long runs for later analysis
- Full protection set: OVP, OCP, OPP, OTP and a programmable electronic fuse (FuseLink)
- USB and LAN (VXI-11) remote control as standard, with optional WLAN and IEEE-488 (GPIB) modules
Typical applications
- Charge/discharge cycling and characterisation of lithium and rechargeable batteries
- Power consumption analysis of smartphones, wearables and IoT modules
- Reproducing the instantaneous current swings of sleep/transmit mode changes
- Recreating low-battery, voltage-droop and transient conditions for battery-powered products
- Supplying analog, RF and sensor circuits that are sensitive to supply noise
- Precision DC supply testing in development, manufacturing and quality assurance
Configure your R&S®NGL200 Series
Pick a base model and its options, watch your order list build as you go, then send it for a quote in one click. Every order number (Order No.) comes from Rohde & Schwarz factory data.
2
Hardware options
1 option
3
Software options (K-options)
3 options
4
PC software
1 option
5
Accessories
6 optionsAvailable models / variants
The series comprises the 2 variants below. Click "Request a quote" for full specifications and pricing on a given model from KanTek.
| Model | Differences | |
|---|---|---|
| NGL201 | One-channel model, 60 W maximum output power (order no. 3638.3376.02) | Request a quote → |
| NGL202 | Two-channel model, 60 W per channel and 120 W in total (order no. 3638.3376.03) | Request a quote → |
Frequently asked questions
Yes. KanTek Technology is the authorized Taiwan distributor for Rohde & Schwarz, supplying new R&S®NGL200 Series instruments with factory quotations and technical advice.
Instrument rental is launching soon. R&S®NGL200 Series is part of the line-up being prepared, and advance enquiries are welcome.
Yes. KanTek provides calibration and repair for R&S®NGL200 Series, with calibration performed by a partner laboratory, to keep the instrument accurate and available.
Use Request a quote on this page, or call +886-2-2999-7719. KanTek replies within 24 hours with pricing, lead time and the options that suit your application.
R&S®NGL200 Series is a Rohde & Schwarz product: Two-quadrant linear DC power supply that also sinks current (up to 120 W). Contact KanTek for selection or application advice.
Authorized R&S distributor
Repair and calibration services
Instrument rental, launching soon
Reply within 24 hours
Need R&S®NGL200 Series pricing, rental or calibration?