1
R&S®TS-LBS
LBS positioning conformance test system (2G – 5G)
- Category: Wireless device test system
- Manufacturer: Rohde & Schwarz
- Supported satellite navigation technologies: GPS, Glonass, BeiDou, A-GPS, A-Glonass, A-BeiDou
- Supported network-based positioning technologies: OTDOA, eCID, UL-TDOA, DL-TDOA, UL-AoA, DL-AoD, multi-RTT
- Hybrid positioning: A-GPS + Glonass, A-GPS + OTDOA/eCID
- Positioning protocols: RRC, RRLP, LPP, SUPL 1.0 / 2.0 (C-plane / U-plane)
- Supported wireless standards: GSM/EGPRS, WCDMA/HSPA, LTE FDD/TDD, 5G NR FR1 & FR2 (NSA / SA)
- Regulatory compliance: EN 303 413 receiver testing; E112 (EU) 2019/320 Galileo / AML testing
- Rated supply voltage: 120 V AC or 230 V AC
- Rated frequency: 50 Hz ~ 60 Hz
- Maximum power consumption: 350 VA
- Operating temperature range: +20 °C ~ +26 °C
- Storage temperature range: 0 °C ~ +40 °C
- Relative humidity (non-condensing): 20 % ~ 80 %
- Dimensions (W x H x D): 465.1 mm × 352.3 mm × 517.0 mm
- Weight: Approx. 25.9 kg, depending on the system configuration
- Data sheet: Download PDF
- Product brochure: Download PDF
- External link: Official product page
Product overview
The R&S®TS-LBS is a comprehensive test solution for network-based and satellite-based location based services (LBS) testing of wireless devices and chipsets. The system is highly configurable and covers LBS conformance testing and carrier acceptance testing of GSM, WCDMA, LTE and 5G devices, as well as EN 303 413 receiver regulatory testing and the GNSS test requirements of E112 (EU) 2019/320 for Galileo and advanced mobile location (AML). Built around the R&S®CMW500 multi-technology network emulator and the R&S®SMBV100A GNSS simulator, it scales from development work up to full type approval and operator acceptance testing.
Key features
- Full coverage of satellite, cellular, indoor and hybrid positioning: A-GNSS (GPS, Glonass, BeiDou), Bluetooth®, barometric and Wi-Fi standalone positioning, plus the OTDOA/eCID, UL-TDOA, DL-TDOA, UL-AoA, DL-AoD and multi-RTT network positioning methods
- Wide standards coverage: 3GPP protocol conformance and minimum performance testing (37.571-1/2, 34.123, 51.010-1); OMA SUPL 2.0 protocol conformance; carrier acceptance test plans (AT&T, Verizon Wireless, T-Mobile, NTT DoCoMo)
- Latest 5G NSA and SA FR1 / FR2 A-GNSS support, covering positioning tests in both the 5G NR millimeterwave and sub-6 GHz bands
- Field-to-lab record and replay: 16-bit high-fidelity recording and replay of GPS, Glonass, BeiDou and SBAS satellite signals; removable SSD; synchronized recording of hybrid GNSS and network positioning
- Highly automated: fully automated test sequences and test plan execution for continuous 24/7 operation; automated path calibration; live report generator and summary report manager
- Flexibly expandable GNSS simulator (R&S®SMBV100A) with options for GPS (R&S®SMBV-K44), A-GPS (K65), Glonass (K94), A-Glonass (K95), BeiDou (K107), GNSS Enhanced (K92) and the 12-satellite extension (K91)
- Development support features: parameter evaluation mode (PEM), margin search, user-defined GNSS scenarios, E911 R&D functions and the CMWmars multipurpose log file analyser
- Intuitive R&S®CONTEST GUI: drag-and-drop test plan creation; graphical DUT antenna configuration; live PASS/FAIL results; HTML report output; integration with an external PostgreSQL database
Typical applications
- 3GPP and CTIA conformance certification testing (GCF / PTCRB validation)
- Carrier acceptance testing (AT&T, Verizon, T-Mobile and NTT DoCoMo test plans)
- Design verification and development testing, across the development, precertification and type approval stages
- Pre-launch evaluation and performance benchmarking
- Positioning function testing of mobile applications
- Regression testing
- Over-the-air (OTA) performance testing, with the R&S®TS8991 system
- Satellite signal recording and lab replay (field-to-lab record and replay)
Configure your R&S®TS-LBS
Pick a base model and its options, watch your order list build as you go, then send it for a quote in one click. Every order number (Order No.) comes from Rohde & Schwarz factory data.
2
Hardware options
7 options
3
Accessories
4 optionsAvailable models / variants
This series comes in the 2 variants below. Click "Request a quote" to ask KanTek Technology for the full specification and pricing of that model.
| Model code | Specification difference | |
|---|---|---|
| — | Focused on A-GNSS testing (A-GPS, A-Glonass, A-BeiDou); covers protocol conformance and minimum performance testing; built around the R&S®CMW500 and covering the GSM, WCDMA and LTE 3GPP radio access technologies. | Request a quote → |
| — | Covers every LBS technology, from A-GNSS through to network positioning (OTDOA/eCID); supports the full test cycle from development to type approval; expandable to RRM and PQA performance testing; covers several 3GPP radio access technologies for UEs and chipsets. | Request a quote → |
Frequently asked questions
Yes. KanTek Technology is the authorized Taiwan distributor for Rohde & Schwarz, supplying new R&S®TS-LBS instruments with factory quotations and technical advice.
Instrument rental is launching soon. R&S®TS-LBS is part of the line-up being prepared, and advance enquiries are welcome.
Yes. KanTek provides calibration and repair for R&S®TS-LBS, with calibration performed by a partner laboratory, to keep the instrument accurate and available.
Use Request a quote on this page, or call +886-2-2999-7719. KanTek replies within 24 hours with pricing, lead time and the options that suit your application.
R&S®TS-LBS is a Rohde & Schwarz product: LBS positioning conformance test system (2G – 5G). Contact KanTek for selection or application advice.
Authorized R&S distributor
Repair and calibration services
Instrument rental, launching soon
Reply within 24 hours
Need R&S®TS-LBS pricing, rental or calibration?