1
R&S®CMW270
Wireless connectivity tester (Bluetooth LE/BR/EDR and WLAN signaling test)
- Category: Wireless device test system
- Manufacturer: Rohde & Schwarz
- Supported wireless standards: WLAN IEEE 802.11a/b/g/n/ac/ax; Bluetooth LE / BR / EDR; GNSS; broadcast technologies
- WLAN bandwidth: Up to 160 MHz
- WLAN operating modes: SISO and MIMO signaling test
- Bluetooth test qualification: Qualified by Bluetooth SIG (LE, BR and EDR RF prequalification tests)
- Network emulation modes: WLAN access point (AP) and station (client) emulation; conducted (central/peripheral) and over-the-air (OTA) Bluetooth connection emulation
- Signal generation: General purpose ARB generator for Bluetooth, WLAN, GNSS and broadcast technologies
- IP application testing: Deep packet inspection (DPI); IP traffic analysis; OTT behaviour optimization
- Test automation: Customizable R&S®CMWrun test sequencer
- Remote control: LAN (LXI); GPIB; USB; HiSLIP; SCPI
- Main application areas: Laptops, IoT devices, game consoles, data cards, wireless headsets, automotive infotainment
- Order number (base model): 1201.0002K75
- Platform family: R&S®CMW500 production test product family
- Data sheet: Download PDF
- Product brochure: Download PDF
- External link: Official product page
Product overview
The R&S®CMW270 is the non-cellular technology expert, built to test devices with integrated WLAN and Bluetooth communications: laptops, game consoles, data cards, wireless headsets and IoT products. It provides network emulation (signaling mode) for WLAN and Bluetooth®, and signal generation and analysis for WLAN, Bluetooth®, GNSS and broadcast technology standards. As a member of the R&S®CMW500 production test product family, the CMW270 uses a dual tester concept that runs multiple-standard RF measurements on WLAN SISO/MIMO and Bluetooth at the same time and adds IP application testing through deep packet inspection (DPI), which makes it well suited to development, certification and production test.
Key features
- Bluetooth RF tester qualified by Bluetooth SIG, with full coverage of the RF prequalification test cases for Bluetooth LE (Low Energy), Basic Rate (BR) and Enhanced Data Rate (EDR)
- WLAN 11 a/b/g/n/ac/ax SISO and MIMO signaling test with up to 160 MHz bandwidth
- Dual tester concept runs multiple-standard RF measurements on Bluetooth and WLAN signaling at the same time
- General purpose ARB generator for Bluetooth, WLAN, GNSS and various broadcast technologies
- Built-in server for WLAN application testing plus the customizable R&S®CMWrun test sequencer for automated test flows
- Deep packet inspection (DPI) analyses the compliance and security of an application's IP streams and helps optimize battery life
- Conducted and over-the-air (OTA) Bluetooth connection emulation covering both the central and the peripheral role
Typical applications
- Development validation and RF prequalification testing of Bluetooth and WLAN devices such as laptops, IoT devices and wireless headsets
- Signaling tests of WLAN IEEE 802.11ax (Wi-Fi 6) access points and stations under realistic network conditions
- Full RF characterization and direct test mode (DTM) testing of Bluetooth Low Energy (LE) and BR/EDR devices
- IP application testing and battery life optimization, using DPI to analyse OTT behaviour and traffic quality
- Production line testing of the wireless connectivity in automotive infotainment systems
- Wireless coexistence testing of IoT devices and automated user experience (UX) test sequences
Configure your R&S®CMW270
Pick a base model and its options, watch your order list build as you go, then send it for a quote in one click. Every order number (Order No.) comes from Rohde & Schwarz factory data.
2
Hardware options
1 option
3
Software options (K-options)
4 options
4
PC software
3 options
5
Accessories
1 optionAvailable models / variants
This series comes in the 1 variant below. Click "Request a quote" to ask KanTek Technology for the full specification and pricing of that model.
| Model code | Specification difference | |
|---|---|---|
| 1201.0002K75 | Base wireless connectivity tester with WLAN and Bluetooth signaling test functions | Request a quote → |
Frequently asked questions
Yes. KanTek Technology is the authorized Taiwan distributor for Rohde & Schwarz, supplying new R&S®CMW270 instruments with factory quotations and technical advice.
Instrument rental is launching soon. R&S®CMW270 is part of the line-up being prepared, and advance enquiries are welcome.
Yes. KanTek provides calibration and repair for R&S®CMW270, with calibration performed by a partner laboratory, to keep the instrument accurate and available.
Use Request a quote on this page, or call +886-2-2999-7719. KanTek replies within 24 hours with pricing, lead time and the options that suit your application.
R&S®CMW270 is a Rohde & Schwarz product: Wireless connectivity tester (Bluetooth LE/BR/EDR and WLAN signaling test). Contact KanTek for selection or application advice.
Authorized R&S distributor
Repair and calibration services
Instrument rental, launching soon
Reply within 24 hours
Need R&S®CMW270 pricing, rental or calibration?