1
R&S®CMW100
Communications manufacturing test set, non-signaling (70 MHz – 6 GHz)
- Category: Wireless device test system
- Manufacturer: Rohde & Schwarz
- Frequency range: 70 MHz to 6 GHz, continuous
- RF bandwidth: Up to 160 MHz
- RF ports: Eight bidirectional full-duplex RF ports
- Parallel testing: Up to eight RF ports tested at the same time
- Generator accuracy: ±0.6 dB
- Analyzer accuracy: ±0.5 dB
- Cooling: Fanless passive cooling, silent operation
- Dust protection: Dustproof housing with no air intake
- Mounting orientation: Mountable horizontally or vertically
- Remote control compatibility: Compatible with the R&S®CMW500 remote control concept
- Operating modes: Non-signaling mode: analyzer / generator
- Power consumption: Very low power design, suited to energy-efficient production lines
- Data sheet: Download PDF
- Product brochure: Download PDF
- External link: Official product page
Product overview
The R&S®CMW100 communications manufacturing test set is a radical new non-signaling approach to smartphone and wireless device production lines. Eight bidirectional full-duplex RF ports let up to eight devices under test (DUT) be tested in parallel, which lifts line throughput considerably. The continuous frequency range from 70 MHz to 6 GHz covers cellular technologies (5G NR, LTE-A, WCDMA, GSM, CDMA2000, TD-SCDMA), non-cellular technologies (WLAN 802.11a/b/g/n/p/ac/ax, Bluetooth® 5.1), IoT standards (Zigbee, LoRa, SigFox, NB-IoT, CAT-M1) and GNSS (GPS, BeiDou, GLONASS, Galileo). Fanless passive cooling makes it silent and dustproof, and the compact housing mounts horizontally or vertically, which suits integration into automated robotic production lines.
Key features
- Continuous frequency range from 70 MHz to 6 GHz covers many wireless technologies on one platform
- Eight bidirectional full-duplex RF ports test up to eight devices in parallel (Smart Channel multi-DUT function)
- High measurement accuracy: generator ±0.6 dB, analyzer ±0.5 dB
- Fanless passive cooling: silent operation and a dustproof housing raise reliability in a production environment
- Mounts horizontally or vertically with a very small footprint, suited to automated robotic production lines
- Compatible with the R&S®CMW500 remote control concept, so test programs port and integrate easily
- Frequency dependent attenuation (FDA) can be set per RF port, and each port output can be switched off individually
- Open architecture allows the latest wireless communication standards to be adopted quickly
- Very low power consumption meets the demands of an energy-efficient production environment
- A production test platform in widespread use at the world's leading smartphone manufacturers
Typical applications
- RF calibration and functional verification on smartphone and tablet production lines
- Small cell transceiver production line testing
- Receiver and transmitter testing of cellular and non-cellular wireless devices
- Manufacturing test of IoT devices (Zigbee, LoRa, SigFox, NB-IoT)
- Shielded box and over-the-air (OTA) production test environments
- Validation of wearables, medical and health devices and connected car (C-V2X) wireless modules
- Manufacturing quality control of smart home, smart city and industrial IoT wireless devices
Configure your R&S®CMW100
Pick a base model and its options, watch your order list build as you go, then send it for a quote in one click. Every order number (Order No.) comes from Rohde & Schwarz factory data.
2
Hardware options
1 optionAvailable models / variants
This series comes in the 1 variant below. Click "Request a quote" to ask KanTek Technology for the full specification and pricing of that model.
| Model code | Specification difference | |
|---|---|---|
| R&S®CMW100 | Base communications manufacturing test set with eight RF ports, a continuous 70 MHz to 6 GHz range and 5G NR sub-6 GHz non-signaling test | Request a quote → |
Frequently asked questions
Yes. KanTek Technology is the authorized Taiwan distributor for Rohde & Schwarz, supplying new R&S®CMW100 instruments with factory quotations and technical advice.
Instrument rental is launching soon. R&S®CMW100 is part of the line-up being prepared, and advance enquiries are welcome.
Yes. KanTek provides calibration and repair for R&S®CMW100, with calibration performed by a partner laboratory, to keep the instrument accurate and available.
Use Request a quote on this page, or call +886-2-2999-7719. KanTek replies within 24 hours with pricing, lead time and the options that suit your application.
R&S®CMW100 is a Rohde & Schwarz product: Communications manufacturing non-signaling test set (70 MHz – 6 GHz). Contact KanTek for selection or application advice.
Authorized R&S distributor
Repair and calibration services
Instrument rental, launching soon
Reply within 24 hours
Need R&S®CMW100 pricing, rental or calibration?