1
R&S®CMA180
Radio test set (DMR / P25 / NXDN / TETRA / avionics)
- Category: Wireless device test system
- Manufacturer: Rohde & Schwarz
- Frequency range: 0.1 MHz to 3 GHz
- Maximum input power: 150 W
- Supported digital standards: DMR, APCO P25, NXDN, dPMR, TETRA, POCSAG, Zigbee
- Supported analog modulation: AM, FM, PM, SSB, CW
- Avionics test: ILS (LOC / GS), VOR, marker beacon, with VoIP EUROCAE ED-137B/C support
- I/Q functions: Built-in I/Q recording and playback
- Spectrum analyzer: Built-in swept spectrum analyzer with tracking generator
- AC power supply: 110 V to 250 V AC
- DC power supply: 10 V to 30 V DC (optional battery pack available)
- Automation interface: R&S®CMArun software control, VISA remote control supported
- Base order number: 1173.2000K18 (base)
- Vector signal analysis: Vector signal analysis (VSA) for constellation diagram and EVM measurements
- Data sheet: Download PDF
- Product brochure: Download PDF
- External link: Official product page
Product overview
The R&S®CMA180 is a universal radio test set that covers analog and digital radio systems on a single platform. It tunes from 0.1 MHz to 3 GHz and supports the mainstream digital standards DMR, APCO P25, NXDN and TETRA, and it also performs avionics measurements on ILS, VOR and marker beacon signals as well as VoIP to EUROCAE ED-137B/C. A built-in spectrum analyzer with tracking generator, I/Q recording and playback and vector signal analysis make it suitable for public safety, land mobile radio (LMR), aircraft maintenance and RF component development. The intuitive graphical interface sets the analysis parameters as soon as the operator picks the standard under test, and the R&S®CMArun software turns the instrument into a fully automated test station for service and production work.
Key features
- One instrument covers complete transceiver measurements for analog (AM / FM / PM / SSB / CW) and digital (DMR / APCO P25 / NXDN / dPMR / TETRA) radios
- Built-in swept spectrum analyzer and tracking generator perform RF spectrum analysis with no external add-on module
- Avionics measurements: ILS (LOC / GS), VOR and marker beacon signal generation and measurement, with VoIP EUROCAE ED-137B/C support
- I/Q signal recording and playback captures signals in the field and replays them in the lab
- Vector signal analysis (VSA): constellation diagram, EVM and modulation quality assessment in one instrument
- The intuitive GUI sets the analysis parameters automatically, cutting operating complexity and operator error
- R&S®CMArun automation software runs batch test scripts for production lines and scheduled maintenance
- Optional battery pack and a DC 10 V to 30 V supply suit field and flight line work
- Withstands up to 150 W input power, protecting the measurement path when testing high-power transmitters
Typical applications
- Public safety and land mobile radio (LMR): test and service of DMR, APCO P25, NXDN and TETRA digital radio transceivers
- Avionics maintenance: verification of ILS (LOC / GS), VOR and marker beacon ground stations and airborne equipment, and voice over IP (VoIP) communication quality
- FM / AM radio transceiver testing: factory test, service acceptance and scheduled calibration of analog radio systems
- Digital waveform transmit and receive testing: functional verification and modulation quality measurement (EVM, constellation diagram)
- RF component and system development: filter, amplifier and antenna characterization using the spectrum analyzer and tracking generator
Configure your R&S®CMA180
Pick a base model and its options, watch your order list build as you go, then send it for a quote in one click. Every order number (Order No.) comes from Rohde & Schwarz factory data.
2
Hardware options
2 options
3
Software options (K-options)
5 options
4
PC software
1 optionAvailable models / variants
This series comes in the 1 variant below. Click "Request a quote" to ask KanTek Technology for the full specification and pricing of that model.
| Model code | Specification difference | |
|---|---|---|
| 1173.2000K18 | Base radio test set, including the spectrum analyzer and AM/FM/PM/SSB/CW analog test functions | Request a quote → |
Frequently asked questions
Yes. KanTek Technology is the authorized Taiwan distributor for Rohde & Schwarz, supplying new R&S®CMA180 instruments with factory quotations and technical advice.
Instrument rental is launching soon. R&S®CMA180 is part of the line-up being prepared, and advance enquiries are welcome.
Yes. KanTek provides calibration and repair for R&S®CMA180, with calibration performed by a partner laboratory, to keep the instrument accurate and available.
Use Request a quote on this page, or call +886-2-2999-7719. KanTek replies within 24 hours with pricing, lead time and the options that suit your application.
R&S®CMA180 is a Rohde & Schwarz product: Radio test set (DMR / P25 / NXDN / TETRA / avionics). Contact KanTek for selection or application advice.
Authorized R&S distributor
Repair and calibration services
Instrument rental, launching soon
Reply within 24 hours
Need R&S®CMA180 pricing, rental or calibration?