1
R&S®NPA
Power analyzer (50 µW – 12 kW, DC – 100 kHz)
- Category: Power analyzer
- Manufacturer: Rohde & Schwarz
- Bandwidth: DC – 100 kHz
- Power measurement range: 50 µW – 12 kW
- Voltage measurement range: 1 mV – 600 V
- Current measurement range: 1 mA – 20 A
- Basic accuracy: 0.05% of reading
- Frequency accuracy: 0.1% of reading
- Sampling frequency: 500 ksample/s
- Input impedance: 2 MΩ
- Display resolution: 5 digits, 10 updates/s
- Display: 320 × 240 pixel (QVGA color)
- Operating temperature: +5 °C – +40 °C
- Dimensions (W x H x D): 222 mm × 97 mm × 291 mm
- Weight: approx. 3.25 kg
- Rated mains voltage (AC): 100 V – 115 V / 230 V, 50/60 Hz
- Rated power consumption: 35 W
- Data sheet: Download PDF
- External link: Official product page
Product overview
The R&S®NPA series of single-phase power analyzers is a compact, all-round instrument built for characterizing AC/DC loads and standby current, with a basic accuracy of 0.05 % and low-current measurement down to 5 mA. Graphical analysis and compliance evaluation are built in, 26 key parameters are shown at once, and harmonics analysis and regulatory compliance testing run in the instrument with no external software. A 500 ksample/s sampling rate and a 100 ms update rate lift throughput on the production line and in development alike. The series comes with USB-TMC, USB-CDC and LAN remote control interfaces, for development, production and quality assurance.
Key features
- Power measurement range 50 µW – 12 kW with DC – 100 kHz bandwidth, covering a wide span of power electronics testing
- 0.05 % basic accuracy and a 500 ksample/s sampling rate, for accurate results at speed
- In-device graphical analysis and regulatory compliance evaluation, supporting IEC 62301, EN 50564 and EN 61000-3-2
- 26 key electrical parameters displayed at once, including harmonics analysis (voltage and current RMS values and phase angles up to the 50th harmonic)
- Three switchable crest factor settings, plus autoranging to keep test times down
- Frequency and adaptive filtering suppress noise and keep readings smooth and accurate
- USB-TMC, USB-CDC (virtual COM) and LAN remote control as standard; IEEE-488 (GPIB) optional
- Compact housing, with an optional 19" 2U rack kit for automated production lines
Typical applications
- Electronics development (R&D): efficiency analysis of AC/DC power supplies and power converters
- Production-line testing: a fast test cycle (100 ms update rate) holds quality control at high throughput
- Quality assurance (QA): standby power compliance verification to IEC 62301 / EN 50564
- Harmonic current compliance testing to EN 61000-3-2, for household appliances, industrial equipment and lighting
- Electrical safety approval testing: automated compliance evaluation reports (NPA701 / NPA701-G)
Configure your R&S®NPA
Pick a base model and its options, watch your order list build as you go, then send it for a quote in one click. Every order number (Order No.) comes from Rohde & Schwarz factory data.
2
Hardware options
1 option
3
Probes
2 options
4
Accessories
4 optionsAvailable models / variants
This series comes in the 5 model variants below. Click Request a quote to ask KanTek for the full specifications and a price for the model you need.
| Model code | Specification differences | |
|---|---|---|
| R&S®NPA101 (3657.0562.02) | Power meter (basic measurement functions) | Request a quote → |
| R&S®NPA501 (3657.0562.03) | Power analyzer (basic + advanced + graphical analysis) | Request a quote → |
| R&S®NPA701 (3657.0562.04) | Compliance tester (with in-device compliance evaluation) | Request a quote → |
| R&S®NPA501-G (3657.0562.05) | Power analyzer with IEEE-488 (GPIB) interface | Request a quote → |
| R&S®NPA701-G (3657.0562.06) | Compliance tester with IEEE-488 (GPIB) interface and in-device compliance evaluation | Request a quote → |
Frequently asked questions
Yes. KanTek Technology is the authorized Taiwan distributor for Rohde & Schwarz, supplying new R&S®NPA instruments with factory quotations and technical advice.
Instrument rental is launching soon. R&S®NPA is part of the line-up being prepared, and advance enquiries are welcome.
Yes. KanTek provides calibration and repair for R&S®NPA, with calibration performed by a partner laboratory, to keep the instrument accurate and available.
Use Request a quote on this page, or call +886-2-2999-7719. KanTek replies within 24 hours with pricing, lead time and the options that suit your application.
R&S®NPA is a Rohde & Schwarz product: Power analyzer (50 µW – 12 kW, DC – 100 kHz). Contact KanTek for selection or application advice.
Authorized R&S distributor
Repair and calibration services
Instrument rental, launching soon
Reply within 24 hours
Need R&S®NPA pricing, rental or calibration?