1
R&S®RTC1000 series
Entry-level oscilloscope for education and basic measurement (50–300 MHz)
- Category: Oscilloscopes
- Manufacturer: Rohde & Schwarz
- Bandwidth: 50 MHz / 70 MHz / 100 MHz / 200 MHz / 300 MHz (software upgrade)
- Analog channels: 2 channels
- Maximum sample rate: 2 GSa/s
- Memory depth: 2 Msample
- Waveform acquisition rate: >10,000 wfms/s
- Display: 6.5" TFT colour display
- Data sheet: Download PDF
- Product brochure: Download PDF
- External link: Official product page
Product overview
The R&S®RTC1000 is the entry-level education oscilloscope series from Rohde & Schwarz, with 50 MHz to 300 MHz bandwidth and 2 analog channels, and bandwidth upgradeable by software key. A 2 GSa/s sample rate, 2 Msample of memory and an acquisition rate above 10,000 wfms/s make it a good fit for electronics teaching laboratories, technical service work and entry-level embedded system development.
Key features
- Five bandwidth grades (50/70/100/200/300 MHz), upgradeable at any time by software key
- 2 GSa/s sample rate with 2 Msample of memory, capturing detail clearly
- Waveform acquisition rate >10,000 wfms/s, catching sporadic anomalies
- Optional MSO upgrade (RTC-B1) adding 8 digital channels
- Optional built-in waveform / pattern generator (RTC-B6), saving a second instrument
- Triggering and decoding for the I²C, SPI, UART, CAN and LIN serial protocols
- 6.5" colour display with an intuitive interface suited to teaching
Typical applications
- Teaching laboratories at colleges and vocational institutes
- Entry-level embedded system development and debugging
- Technical repair and service support work
- Serial bus (I²C/SPI/UART/CAN/LIN) communication verification
- Electronic component testing and basic fault diagnosis
Configure your R&S®RTC1000 Series
Pick a base model and its options, watch your order list build as you go, then send it for a quote in one click. Every order number (Order No.) comes from Rohde & Schwarz factory data.
2
Hardware options
6 options
3
Software options (K-options)
4 options
4
Probes
17 options
5
Accessories
6 optionsAvailable models / variants
This series comes in the following 5 variants. Click “Request a quote” to ask KanTek for the full specifications and pricing of the model you need.
| Model code | Specification differences | |
|---|---|---|
| RTC1002 | 2 channels / 50 MHz base model | Request a quote → |
| RTC1002 + RTC-B220 | 2 channels / 70 MHz (software upgrade) | Request a quote → |
| RTC1002 + RTC-B221 | 2 channels / 100 MHz (software upgrade) | Request a quote → |
| RTC1002 + RTC-B222 | 2 channels / 200 MHz (software upgrade) | Request a quote → |
| RTC1002 + RTC-B223 | 2 channels / 300 MHz (software upgrade) | Request a quote → |
Frequently asked questions
Yes. KanTek Technology is the authorized Taiwan distributor for Rohde & Schwarz, supplying new R&S®RTC1000 Series instruments with factory quotations and technical advice.
Instrument rental is launching soon. R&S®RTC1000 Series is part of the line-up being prepared, and advance enquiries are welcome.
Yes. KanTek provides calibration and repair for R&S®RTC1000 Series, with calibration performed by a partner laboratory, to keep the instrument accurate and available.
Use Request a quote on this page, or call +886-2-2999-7719. KanTek replies within 24 hours with pricing, lead time and the options that suit your application.
R&S®RTC1000 Series is a Rohde & Schwarz product: Entry-level oscilloscope for education and basic measurements (50 MHz to 300 MHz). Contact KanTek for selection or application advice.
Authorized R&S distributor
Repair and calibration services
Instrument rental, launching soon
Reply within 24 hours
Need R&S®RTC1000 Series pricing, rental or calibration?