1
R&S®EVSD1000
VHF / UHF navigation and drone (UAV) airborne analyzer (70 – 410 MHz)
- Category: Navigation analyzer
- Manufacturer: Rohde & Schwarz
- Frequency range: 70 MHz to 410 MHz
- Frequency resolution: 10 Hz
- Preselection filter ranges: 74.7 – 75.3 MHz (MB), 108 – 118 MHz (ILS LLZ / VOR / GBAS), 118 – 145 MHz (COM 1), 220 – 410 MHz (ILS GS / COM 2)
- Maximum input level: +30 dBm (CW RF power)
- Level measurement uncertainty (absolute, 113 MHz): < 1.0 dB (70 – 410 MHz, RF mode auto, 10 kHz IF bandwidth, 95 % confidence level, +20 °C to +30 °C)
- Measurement rate: up to 100 data records per second
- ILS DDM measurement uncertainty (localizer, normal mode): ≤ 0.04 % DDM ± 0.1 % of reading (≤ ±10 % DDM)
- VOR bearing measurement uncertainty: ≤ ±0.05° (RF mode auto, 25/36/50 kHz IF bandwidth, input level –80 dBm to +10 dBm)
- Internal storage capacity: 8 GB (CSV or native R&S®EVSG format)
- RF input connector: SMA female, 50 Ω
- Power supply: 10 V to 28 V DC, 3 A max.; optional lithium-ion battery (R&S®EVSD1-Z1) for 1 hour of operation
- Operating temperature range: –10 °C to +50 °C
- Ingress protection: IP43 (to EN 60529)
- Maximum operating altitude: 4600 m (approx. 15100 ft)
- Dimensions (W x H x D): 168 mm × 106 mm × 330 mm (6.61 in × 4.17 in × 12.99 in)
- Weight (base unit): 1450 g (3.20 lb)
- Calibration interval: 12 months recommended (24 months for general measurement use)
- Standards conformity: ICAO Annex 10, ICAO Doc 8071, RTCA DO-246; EMC: EN 61326-1, EN 55011; safety: IEC/EN 61010-1, UL 61010-1; certification: CE, UKCA, KC
- Data sheet: Download PDF
- Product brochure: Download PDF
- External link: Official product page
Product overview
The R&S®EVSD1000 is a signal level and modulation analyzer designed for medium-sized drones. It analyses ILS (instrument landing system), GBAS (ground-based augmentation system) and VOR (VHF omnidirectional range) ground stations precisely and reproducibly in line with ICAO Doc 8071 and Annex 10, and it also analyses air traffic control (ATC COM) communications signals. The extremely compact housing can take an integrated battery and a Wi-Fi data link module, which makes it particularly suited to flight inspection work in places that are hard to reach or where conventional ground measurement is restricted.
Key features
- Precise, reproducible analysis of ILS, GBAS and VOR ground stations in line with ICAO Doc 8071 and Annex 10
- High measurement rate: up to 100 data records per second, for dynamic in-flight measurement
- Simultaneous analysis of course and clearance signals on dual-frequency (2F) ILS systems (requires option K1)
- Compact, light and rugged enough to integrate straight into a drone measurement system, and supplied with the ILS/VOR antenna (R&S®EVSD1-Z3)
- Optional lithium-ion battery (R&S®EVSD1-Z1) for standalone power, with 1 hour of operation
- Optional K-series software licences extend the instrument to detailed VOR analysis (K2), GBAS testing (K4), ATC COM analysis (K6), RF/AF spectrum analysis (K10/K11), time domain analysis (K12) and I/Q data streaming (K25)
- 8 GB of internal storage with export in CSV or the native R&S®EVSG format
- IP43 ingress protection and operation from –10 °C to +50 °C
- Straightforward remote control through the Wi-Fi data link module (R&S®EVSD1-Z5) at ranges up to 1000 m (line of sight)
- GNSS RTK support (R&S®EVSD1-Z6) for decimetre-level positioning accuracy, which suits precisely georeferenced measurement
Typical applications
- Commissioning, maintenance and service of ILS (localizer, glide path), VOR and marker beacon ground stations
- VDB signal testing and verification of GBAS ground stations
- Level, frequency and modulation analysis of air traffic control (ATC) communications signals
- Drone-borne flight inspection of navigation systems at locations conventional ground measurement cannot reach
- Periodic calibration checks and acceptance testing of ground navigation equipment to ICAO requirements
Configure your R&S®EVSD1000
Pick a base model and its options, watch your order list build as you go, then send it for a quote in one click. Every order number (Order No.) comes from Rohde & Schwarz factory data.
2
Hardware options
11 options
3
Software options (K-options)
9 options
4
PC software
1 optionAvailable models / variants
This series comes in the 1 model variant below. Click Request a quote to ask KanTek for the full specifications and a price for the model you need.
| Model | Specification | |
|---|---|---|
| R&S®EVSD1000 (1330.0350.02) | Base unit, including the DC power cable (0.5 m), LAN cable (1 m), GNSS cable (2 m, open end) and getting started guide (English) | Request a quote → |
Frequently asked questions
Yes. KanTek Technology is the authorized Taiwan distributor for Rohde & Schwarz, supplying new R&S®EVSD1000 instruments with factory quotations and technical advice.
Instrument rental is launching soon. R&S®EVSD1000 is part of the line-up being prepared, and advance enquiries are welcome.
Yes. KanTek provides calibration and repair for R&S®EVSD1000, with calibration performed by a partner laboratory, to keep the instrument accurate and available.
Use Request a quote on this page, or call +886-2-2999-7719. KanTek replies within 24 hours with pricing, lead time and the options that suit your application.
R&S®EVSD1000 is a Rohde & Schwarz product: VHF / UHF nav drone (UAV) airborne analyzer (70 – 410 MHz). Contact KanTek for selection or application advice.
Authorized R&S distributor
Repair and calibration services
Instrument rental, launching soon
Reply within 24 hours
Need R&S®EVSD1000 pricing, rental or calibration?