1
R&S®EDS300
Navigation signal level and modulation analyzer (DME / TACAN, for commissioning and verification)
- Category: Navigation analyzer
- Manufacturer: Rohde & Schwarz
- Receiver sensitivity: –97 dBm
- Distance measurement uncertainty: 0.01 (for input levels down to –80 dBm) NM
- TACAN bearing deviation: 0.2 (for input levels ≥ –80 dBm) °
- Dynamic range: 105 dB
- Standards conformity: ICAO Doc. 8071, ICAO Annex 10, STANAG 5034, MIL-STD-291C
- Multiple DME mode: Measures up to 10 DME stations at the same time
- Remote control interfaces: LAN
- Data logging interface: USB (data logger)
- Data sheet: Download PDF
- Product brochure: Download PDF
- External link: Official product page
Product overview
The R&S®EDS300 is a high-precision DME and pulse analyzer built for flight inspection of TACAN and DME ground stations. It performs precise TX and RX measurements in both stationary ground and airborne mobile operation, conforms to ICAO Doc. 8071, ICAO Annex 10, STANAG 5034 and MIL-STD-291C, and suits commissioning verification as much as routine maintenance checks of navigation facilities.
Key features
- High-precision distance and level measurements on DME ground stations
- Precise analysis of military TACAN stations, including bearing deviation measurement
- 105 dB dynamic range for demanding electromagnetic environments
- Detailed analysis to ICAO, STANAG and MIL-STD requirements
- Multiple DME mode: measures up to 10 DME stations at the same time
- Dual-channel simultaneous measurement with the EDS-B1 additional RX unit
- High-power interrogator option for flight inspection (EDS-B4: 500 W)
- TACAN ground station modulation and signal analysis (requires the EDS-K1 software)
- GPS-synchronized measurements (requires the EDS-K3 software and an external NMEA GPS receiver)
- Compact, robust design for stationary and mobile use
- Remote control over LAN, with measurement results exported through the USB data logger
Typical applications
- Commissioning verification and routine flight inspection of DME ground stations
- Performance verification of military TACAN navigation stations
- Maintenance and fault diagnosis of navigation facilities
- Airborne flight inspection work (with the high-power interrogator option)
- Simultaneous signal level monitoring of several DME stations
- Compliance verification of defense and civil aviation infrastructure (ICAO/STANAG/MIL-STD)
Configure your R&S®EDS300
Pick a base model and its options, watch your order list build as you go, then send it for a quote in one click. Every order number (Order No.) comes from Rohde & Schwarz factory data.
2
Hardware options
4 options
3
Software options (K-options)
4 options
4
Accessories
6 optionsFrequently asked questions
Yes. KanTek Technology is the authorized Taiwan distributor for Rohde & Schwarz, supplying new R&S®EDS300 instruments with factory quotations and technical advice.
Instrument rental is launching soon. R&S®EDS300 is part of the line-up being prepared, and advance enquiries are welcome.
Yes. KanTek provides calibration and repair for R&S®EDS300, with calibration performed by a partner laboratory, to keep the instrument accurate and available.
Use Request a quote on this page, or call +886-2-2999-7719. KanTek replies within 24 hours with pricing, lead time and the options that suit your application.
R&S®EDS300 is a Rohde & Schwarz product: Navigation signal level and modulation analyzer (DME / TACAN, for commissioning and verification). Contact KanTek for selection or application advice.
Authorized R&S distributor
Repair and calibration services
Instrument rental, launching soon
Reply within 24 hours
Need R&S®EDS300 pricing, rental or calibration?