1
R&S®SGS100A
SGMA RF source (1 MHz – 12.75 GHz, 1U half-rack)
- Category: Analog signal generator
- Manufacturer: Rohde & Schwarz
- Frequency range (standard): 1 MHz to 6 GHz
- Frequency range (extended): 1 MHz to 12.75 GHz
- Maximum output level: typ. +22 dBm
- Chassis dimensions: 1U high × 1/2 19 inch rack width
- Remote interfaces: PCIe / Ethernet
- Modulation types: CW or I/Q vector modulation (depending on model)
- Step attenuator: Wear-free electronic attenuator (R&S®SGS-B26 option)
- Reference oscillator: OCXO (R&S®SGS-B1 option)
- Pulse modulation: R&S®SGS-K22 option
- Calibration interval: Long calibration interval, for lower maintenance cost
- Warranty: 3-year standard warranty
- Phase coherence input/output: R&S®SGS-K90 option
- Data sheet: Download PDF
- Product brochure: Download PDF
- External link: Official product page
Product overview
The R&S®SGS100A SGMA RF source is a high-performance RF signal generator designed around the needs of automated test systems. It works either as a CW source or, with I/Q modulation built in, as a vector signal generator, covering frequencies up to 12.75 GHz. The half-rack 1U chassis delivers a maximum output level of +22 dBm, and PCIe or Ethernet control gives the very fast setting speeds that high-throughput production demands. Its modular design keeps system integration flexible, while a wear-free electronic attenuator and a long calibration interval lower the overall cost of ownership and raise test reliability.
Key features
- The smallest fully integrated vector signal generator on the market: 1U × half rack saves system space
- Excellent RF performance with a maximum output level of typ. +22 dBm, enough to compensate setup losses
- Fast setting over PCIe / Ethernet, raising automated test throughput
- High linearity and repeatability for consistent test conditions
- Wear-free electronic step attenuator for long-term reliability (R&S®SGS-B26 option)
- A clean modular design shortens service time and reduces the risk of downtime
- A long calibration interval reduces routine maintenance cost
- Optional OCXO high-stability reference oscillator (R&S®SGS-B1) for improved frequency accuracy
- Supports phase coherent multichannel output/input applications (R&S®SGS-K90 option)
Typical applications
- Integration into automated test equipment (ATE) systems
- Signal generation and verification for digital communications systems
- Local oscillator (LO) applications
- Interference immunity testing against mobile radio standards
- Millimeter-wave upconversion systems (with the R&S®SGU100A)
- Characterization of aerospace and defense RF components
Configure your R&S®SGS100A
Pick a base model and its options, watch your order list build as you go, then send it for a quote in one click. Every order number (Order No.) comes from Rohde & Schwarz factory data.
2
Hardware options
2 options
3
Software options (K-options)
2 options
4
Accessories
6 optionsAvailable models / variants
The series comes in the 4 variants below. Click “Request a quote” for the full specifications and a quotation for that model from KanTek.
| Model code | Specification differences | |
|---|---|---|
| R&S®SGS-B106 (1416.2308.02) | 1 MHz to 6 GHz, CW (no modulation) | Request a quote → |
| R&S®SGS-B106V (1416.2350.02) | 1 MHz to 6 GHz, with I/Q vector modulation | Request a quote → |
| R&S®SGS-B112 (1416.1553.02) | Frequency extended to 12.75 GHz, CW | Request a quote → |
| R&S®SGS-B112V (1416.1576.02) | Frequency extended to 12.75 GHz, with I/Q vector modulation | Request a quote → |
Frequently asked questions
Yes. KanTek Technology is the authorized Taiwan distributor for Rohde & Schwarz, supplying new R&S®SGS100A instruments with factory quotations and technical advice.
Instrument rental is launching soon. R&S®SGS100A is part of the line-up being prepared, and advance enquiries are welcome.
Yes. KanTek provides calibration and repair for R&S®SGS100A, with calibration performed by a partner laboratory, to keep the instrument accurate and available.
Use Request a quote on this page, or call +886-2-2999-7719. KanTek replies within 24 hours with pricing, lead time and the options that suit your application.
R&S®SGS100A is a Rohde & Schwarz product: SGMA RF source (1 MHz – 12.75 GHz, 1U half-rack). Contact KanTek for selection or application advice.
Authorized R&S distributor
Repair and calibration services
Instrument rental, launching soon
Reply within 24 hours
Need R&S®SGS100A pricing, rental or calibration?