1
R&S®HMF2525 / HMF2550 series
Arbitrary function generator (10 μHz – 25/50 MHz)
- Category: Arbitrary function generator
- Manufacturer: Rohde & Schwarz
- Frequency range (HMF2525): 10 μHz – 25 MHz
- Frequency range (HMF2550): 10 μHz – 50 MHz
- Waveforms: Sine, square, triangle/ramp, pulse, arbitrary
- Maximum triangle-wave frequency: 10 MHz
- Output voltage: 5 mV – 10 V (Vpp) into 50 Ω
- Arbitrary waveform sample rate: 250 MSample/s
- Arbitrary waveform resolution: 14 bit
- Arbitrary waveform memory depth: 256 kpoint
- Pulse repetition rate (HMF2525 / HMF2550): Up to 12.5 MHz / 25 MHz
- Pulse width setting range: 15 ns – 999 s, 5 ns resolution
- Pulse rise/fall time: 8 ns – 500 ns
- Output impedance: 50 Ω
- Data sheet: Download PDF
- External link: Official product page
Product overview
The R&S®HMF2525 / HMF2550 is a high-precision arbitrary function generator from Rohde & Schwarz covering 10 μHz to 25 MHz (HMF2525) or 50 MHz (HMF2550), with sine, square, triangle, pulse and arbitrary waveform output. Its arbitrary waveform generator runs at 250 Msample/s with 14-bit resolution and 256 kpoint memory, so complex signals are reproduced faithfully. Strong pulse generation and a low cost of ownership make it a natural choice for the development bench and for production test.
Key features
- Wide frequency range: 10 μHz to 25 MHz (HMF2525) or 50 MHz (HMF2550), for a broad spread of test scenarios
- High-performance arbitrary waveform generation: 250 Msample/s sample rate, 14-bit resolution, 256 kpoint memory depth
- Powerful pulse generator: pulse repetition rate up to 12.5 MHz (HMF2525) / 25 MHz (HMF2550), pulse width settable from 15 ns to 999 s with 5 ns resolution
- Adjustable rise/fall time: 8 ns to 500 ns, for faithful reproduction of real circuit edges
- Wide output voltage range: 5 mV to 10 V (Vpp) into 50 Ω, to suit a wide range of devices under test
- USB port on the front panel: load arbitrary waveform files straight from a USB stick
- Free R&S®HMExplorer PC software: design and import arbitrary waveforms on a PC and transfer them to the instrument over USB
- Interface options: RS-232/USB, Ethernet/USB or IEEE-488 (GPIB) remote control interfaces for system integration
- Triangle waves up to 10 MHz: high-frequency triangle output alongside the other standard waveforms
Typical applications
- Measuring and characterizing input hysteresis of semiconductor devices
- Functional verification and stimulus generation for embedded systems and digital circuits
- Frequency response testing of sensors, filters and analog circuits
- Transient response evaluation of power supplies and DC-DC converters
- Baseband signal simulation for communications and RF modules
- Waveform generation and measurement practicals in teaching and research laboratories
Configure your R&S®HMF2525 / HMF2550 Series
Pick a base model and its options, watch your order list build as you go, then send it for a quote in one click. Every order number (Order No.) comes from Rohde & Schwarz factory data.
2
Hardware options
3 options
3
PC software
1 option
4
Accessories
3 optionsAvailable models / variants
The series comes in the 2 variants below. Click “Request a quote” for the full specifications and a quotation for that model from KanTek.
| Model code | Specification differences | |
|---|---|---|
| HMF2525 (3593.0616.02) | Frequency range 10 μHz – 25 MHz | Request a quote → |
| HMF2550 (3593.0622.02) | Frequency range 10 μHz – 50 MHz | Request a quote → |
Frequently asked questions
Yes. KanTek Technology is the authorized Taiwan distributor for Rohde & Schwarz, supplying new R&S®HMF2525 / HMF2550 Series instruments with factory quotations and technical advice.
Instrument rental is launching soon. R&S®HMF2525 / HMF2550 Series is part of the line-up being prepared, and advance enquiries are welcome.
Yes. KanTek provides calibration and repair for R&S®HMF2525 / HMF2550 Series, with calibration performed by a partner laboratory, to keep the instrument accurate and available.
Use Request a quote on this page, or call +886-2-2999-7719. KanTek replies within 24 hours with pricing, lead time and the options that suit your application.
R&S®HMF2525 / HMF2550 Series is a Rohde & Schwarz product: Arbitrary function generator (10 μHz – 25/50 MHz). Contact KanTek for selection or application advice.
Authorized R&S distributor
Repair and calibration services
Instrument rental, launching soon
Reply within 24 hours
Need R&S®HMF2525 / HMF2550 Series pricing, rental or calibration?