1
R&S®NGE100B series
Basic two/three-channel entry-level DC power supply
- Category: Power supply
- Manufacturer: Rohde & Schwarz
- Channels: 2 or 3 channels (by model)
- Voltage range: 0 V to 32 V per channel
- Maximum current: 3 A per channel
- Maximum power: 100 W (NGE103B) / 66 W (NGE102B)
- Resolution: 10 mV / 1 mA
- Voltage accuracy: <0.05% + 2 mV
- Voltage ripple and noise: <1.5 mV RMS, <20 mV peak-to-peak
- Load recovery time: <200 µs
- Display: 3.5" QVGA (320 × 240 pixel) colour display
- Interfaces: USB (standard), LAN / WLAN (optional)
- Dimensions: 222 × 97 × 310 mm
- Data sheet: Download PDF
- External link: Official product page
Overview
The R&S®NGE100B series is the entry-level basic DC power supply in the R&S Essentials line, available as a two-channel (NGE102B) or three-channel (NGE103B) instrument with up to 100 W of output. All channels are galvanically isolated and earth free, so they can be operated in series or in parallel, and low ripple and noise are paired with a fast response to load changes — a fit for R&D, education, production test and service work. Protection functions (OVP, OCP, OPP, OTP) and a colour display come as standard, with USB, LAN and WLAN remote control options.
Key features
- Two or three outputs, up to 32 V / 3 A per channel and up to 100 W in total
- All channels galvanically isolated and earth free, free to be run in series or in parallel
- Low ripple and noise: <1.5 mV RMS (voltage) / <2 mA RMS (current)
- Fast load recovery time <200 µs for a stable, dependable dynamic response
- Full protection set: overvoltage (OVP), overcurrent (OCP), overpower (OPP), overtemperature (OTP)
- 3.5" QVGA colour display with colour-coded operating conditions
- USB as standard; LAN / WLAN and digital trigger I/O optional
- EasyArb arbitrary waveform output and data logging
- Compact half-19" housing that saves bench and rack space
Typical applications
- Circuit design and prototype verification in R&D laboratories
- Electronics teaching in universities and vocational training
- Functional test and verification on electronics production lines
- Service and maintenance: fault-finding and supply testing
- Development and test of embedded and IoT devices
- Battery simulation and characterisation of low-power components
Configure your R&S®NGE100B Series
Pick a base model and its options, watch your order list build as you go, then send it for a quote in one click. Every order number (Order No.) comes from Rohde & Schwarz factory data.
2
Hardware options
1 option
3
Software options (K-options)
2 options
4
Accessories
1 optionAvailable models / variants
The series comprises the 2 variants below. Click "Request a quote" for full specifications and pricing on a given model from KanTek.
| Model | Differences | |
|---|---|---|
| NGE102B | 2 channels / 66 W (0 V to 32 V, 0 A to 3 A per channel) | Request a quote → |
| NGE103B | 3 channels / 100 W (0 V to 32 V, 0 A to 3 A per channel) | Request a quote → |
Frequently asked questions
Yes. KanTek Technology is the authorized Taiwan distributor for Rohde & Schwarz, supplying new R&S®NGE100B Series instruments with factory quotations and technical advice.
Instrument rental is launching soon. R&S®NGE100B Series is part of the line-up being prepared, and advance enquiries are welcome.
Yes. KanTek provides calibration and repair for R&S®NGE100B Series, with calibration performed by a partner laboratory, to keep the instrument accurate and available.
Use Request a quote on this page, or call +886-2-2999-7719. KanTek replies within 24 hours with pricing, lead time and the options that suit your application.
R&S®NGE100B Series is a Rohde & Schwarz product: Basic two/three-channel entry-level DC power supply. Contact KanTek for selection or application advice.
Authorized R&S distributor
Repair and calibration services
Instrument rental, launching soon
Reply within 24 hours
Need R&S®NGE100B Series pricing, rental or calibration?