1
R&S®NGC100 series
Basic one/two/three-channel DC power supply
- Category: Power supply
- Manufacturer: Rohde & Schwarz
- Channels: 1 / 2 / 3 channels (by model)
- Maximum output power: 100 W
- Output voltage range: 0 V to 32 V (per channel)
- Output current: up to 10 A (NGC101) / 5 A (NGC102) / 3 A (NGC103)
- Setting resolution (voltage): 1 mV
- Setting resolution (current): 0.1 mA / 1 mA (by range)
- Voltage accuracy: ±(0.05% + 2 mV)
- Current accuracy: ±(0.05% + 4 mA) typical
- Voltage ripple and noise: <1 mV RMS (NGC101) / <450 µV RMS (NGC102/103)
- Load recovery time: <1 ms
- Display: 3.5" QVGA colour screen
- Channel isolation: Galvanically isolated (series or parallel operation)
- Standard interfaces: USB, LAN (LXI)
- Optional interfaces: IEEE-488 GPIB (-G models)
- Dimensions (W x H x D): 222 mm × 97 mm × 291 mm
- Weight: 2.6 kg
- Data sheet: Download PDF
- Product brochure: Download PDF
- External link: Official product page
Overview
The R&S®NGC100 series is the basic DC power supply in the R&S®Essentials line, aimed at development laboratories, industrial settings, manufacturing and education. One-, two- and three-channel models are available with up to 100 W of output power and up to 32 V per channel. All channels are galvanically isolated, so they can be connected in series or in parallel to extend the voltage or the current, and the instruments stay efficient, cool and quiet even at full load.
Key features
- FlexPower: maximum output power at many different operating points, so one instrument covers more applications
- EasyArb arbitrary function: builds complex time-varying voltage and current sequences with intervals down to 10 ms
- Data logging on every output channel at up to 1000 samples/s
- Galvanically isolated channels, free to be connected in series or in parallel to extend the voltage or current range
- EasyRamp voltage ramp: a continuous rise over 10 ms to 10 s to keep inrush current under control
- Output delay timing for staged power-up sequences across several rails
- Remote sensing compensates for the drop along the supply leads, holding the set voltage at the load
- External TTL trigger input to start functions from an outside signal
- Analog control input: drive the output directly from 0 V to 10 V or 4 mA to 20 mA
- USB and LAN (LXI) as standard; -G models add GPIB (IEEE-488)
Typical applications
- Circuit design and verification in the development laboratory
- Measurement and power testing in industrial environments
- Manufacturing and quality control on the production line
- University and vocational training laboratories
- Supplying a device under test and verifying its power consumption
- Small and medium power tests needing several channels in series or parallel
Configure your R&S®NGC100 Series
Pick a base model and its options, watch your order list build as you go, then send it for a quote in one click. Every order number (Order No.) comes from Rohde & Schwarz factory data.
2
Hardware options
1 option
3
Software options (K-options)
3 options
4
Accessories
2 optionsAvailable models / variants
The series comprises the 6 variants below. Click "Request a quote" for full specifications and pricing on a given model from KanTek.
| Model | Differences | |
|---|---|---|
| NGC101 | One-channel power supply, 32 V / 10 A, 100 W | Request a quote → |
| NGC101-G | One-channel power supply, 32 V / 10 A, 100 W, with GPIB (IEEE-488) interface | Request a quote → |
| NGC102 | Two-channel power supply, 32 V / 5 A, 100 W | Request a quote → |
| NGC102-G | Two-channel power supply, 32 V / 5 A, 100 W, with GPIB (IEEE-488) interface | Request a quote → |
| NGC103 | Three-channel power supply, 32 V / 3 A, 100 W | Request a quote → |
| NGC103-G | Three-channel power supply, 32 V / 3 A, 100 W, with GPIB (IEEE-488) interface | Request a quote → |
Frequently asked questions
Yes. KanTek Technology is the authorized Taiwan distributor for Rohde & Schwarz, supplying new R&S®NGC100 Series instruments with factory quotations and technical advice.
Instrument rental is launching soon. R&S®NGC100 Series is part of the line-up being prepared, and advance enquiries are welcome.
Yes. KanTek provides calibration and repair for R&S®NGC100 Series, with calibration performed by a partner laboratory, to keep the instrument accurate and available.
Use Request a quote on this page, or call +886-2-2999-7719. KanTek replies within 24 hours with pricing, lead time and the options that suit your application.
R&S®NGC100 Series is a Rohde & Schwarz product: Basic one/two/three-channel DC power supply. Contact KanTek for selection or application advice.
Authorized R&S distributor
Repair and calibration services
Instrument rental, launching soon
Reply within 24 hours
Need R&S®NGC100 Series pricing, rental or calibration?