1
R&S®NGA100 series
Basic linear DC power supply (35 V / 100 V, one or two channels)
- Category: Power supply
- Manufacturer: Rohde & Schwarz
- Models in series: NGA101 / NGA102 / NGA141 / NGA142
- Channels: 1 or 2 channels
- Maximum output power: 40 W single channel / 80 W dual channel (40 W per channel)
- Voltage range: 0 V to 35 V (NGA101/102) or 0 V to 100 V (NGA141/142)
- Current range: 0 A to 6 A (35 V models) or 0 A to 2 A (100 V models)
- Output voltage ripple and noise: < 0.5 mV (RMS) (35 V models) / < 1.5 mV (RMS) (100 V models)
- Output current ripple and noise: < 500 µA (RMS)
- Load recovery time: < 100 µs (35 V models) / < 50 µs (100 V models)
- Programming resolution: 1 mV voltage / 1 mA current
- Voltage readback accuracy: ±(0.02 % + 5 to 10 mV)
- Current readback accuracy: ±(0.03 % + 500 µA)
- Low current measurement resolution: 1 µA (ranges below 200 mA)
- Protection functions: OVP (overvoltage), OCP (overcurrent), OPP (overpower), OTP (overtemperature)
- Display: 3.5" QVGA colour display
- Remote interfaces: USB, Ethernet (LAN)
- Dimensions: 222 × 97 × 448 mm (W × H × D)
- Weight: approx. 6.6 to 7.3 kg, depending on model
- Rack mounting: 19", 2 HU (requires the R&S®HZN96 rack adapter kit)
- Data sheet: Download PDF
- Product brochure: Download PDF
- External link: Official product page
Overview
The R&S®NGA100 series is the basic linear DC power supply in the Rohde & Schwarz Essentials line. The linear architecture gives very low residual ripple and noise, and readback accuracy is good enough to measure currents down to the microamp range. The series covers two voltage ranges, 35 V and 100 V, in single-channel (40 W) and dual-channel (80 W) versions, for R&D, low-power IoT design, manufacturing, education and general bench work. FlexPower delivers maximum power at many different operating points, and channel fusion connects the two channels of a dual-channel model in series or in parallel to extend the voltage or current range. USB and LAN remote control are standard, and OVP, OCP, OPP and OTP protection is built in.
Key features
- Linear architecture with output voltage ripple and noise down to < 0.5 mV (RMS)
- High readback accuracy with a low-current measurement range resolved to 1 µA (< 200 mA), for low-power IoT design
- FlexPower delivers the maximum available output power across many voltage and current operating points
- Channel fusion joins the two channels of a dual-channel model in series for more voltage or in parallel for more current
- Full protection set: overvoltage (OVP), overcurrent (OCP), overpower (OPP) and overtemperature (OTP)
- Built-in statistics record minimum and maximum power, voltage and current
- Data logging and arbitrary waveform output
- USB and Ethernet (LAN) remote control as standard, for easy integration into automated test systems
- 3.5" QVGA colour display with an intuitive operating concept
- 19", 2 HU rack mounting — the R&S®HZN96 adapter kit takes two instruments side by side
Typical applications
- Electronics R&D and prototype verification
- IoT low-power device design and current measurement
- Manufacturing test and quality control
- University and vocational teaching laboratories
- General-purpose benchtop supply
- Integration into automated test equipment (ATE)
Configure your R&S®NGA100 Series
Pick a base model and its options, watch your order list build as you go, then send it for a quote in one click. Every order number (Order No.) comes from Rohde & Schwarz factory data.
2
Hardware options
1 option
3
Accessories
1 optionAvailable models / variants
The series comprises the 4 variants below. Click "Request a quote" for full specifications and pricing on a given model from KanTek.
| Model | Differences | |
|---|---|---|
| R&S®NGA101 | 1 channel, 0 V to 35 V, 0 A to 6 A, 40 W (order no. 5601.8002.02) | Request a quote → |
| R&S®NGA141 | 1 channel, 0 V to 100 V, 0 A to 2 A, 40 W (order no. 5601.8002.03) | Request a quote → |
| R&S®NGA102 | 2 channels, 0 V to 35 V, 0 A to 6 A, 80 W (order no. 5601.8002.04) | Request a quote → |
| R&S®NGA142 | 2 channels, 0 V to 100 V, 0 A to 2 A, 80 W (order no. 5601.8002.05) | Request a quote → |
Frequently asked questions
Yes. KanTek Technology is the authorized Taiwan distributor for Rohde & Schwarz, supplying new R&S®NGA100 Series instruments with factory quotations and technical advice.
Instrument rental is launching soon. R&S®NGA100 Series is part of the line-up being prepared, and advance enquiries are welcome.
Yes. KanTek provides calibration and repair for R&S®NGA100 Series, with calibration performed by a partner laboratory, to keep the instrument accurate and available.
Use Request a quote on this page, or call +886-2-2999-7719. KanTek replies within 24 hours with pricing, lead time and the options that suit your application.
R&S®NGA100 Series is a Rohde & Schwarz product: Basic linear DC power supply (35 V / 100 V, one or two channels). Contact KanTek for selection or application advice.
Authorized R&S distributor
Repair and calibration services
Instrument rental, launching soon
Reply within 24 hours
Need R&S®NGA100 Series pricing, rental or calibration?