1
R&S®HMP4000 series
Three/four-channel high-power linear power supply (up to 384 W)
- Category: Power supply
- Manufacturer: Rohde & Schwarz
- Output channels: 3 or 4 channels (galvanically isolated, floating outputs)
- Output voltage range: 0 V to 32 V (per channel)
- Maximum output current: 10 A (per channel)
- Maximum power per channel: 160 W
- Total output power: 384 W
- Voltage resolution: 1 mV
- Voltage ripple and noise: < 1.5 mV (RMS)
- Current ripple and noise: < 1 mA (RMS)
- Load recovery time: < 1 ms
- Dimensions (W x H x D): 285 × 136 × 405 mm
- Weight: 12.4–12.8 kg
- Data sheet: Download PDF
- Product brochure: Download PDF
- External link: Official product page
Overview
The R&S®HMP4000 series is a high-power linear power supply available with three channels (HMP4030) or four (HMP4040) and up to 384 W of total output power. All outputs are galvanically isolated and floating, so they can be operated in series or in parallel to extend the voltage or current range. Low residual ripple, high efficiency and a full set of protection functions are joined by the EasyArb arbitrary waveform function, which suits production test, service and development laboratories alike.
Key features
- 3 or 4 galvanically isolated floating outputs, all with the same voltage range
- Up to 32 V / 10 A per channel and 384 W in total
- Very low residual ripple and noise (voltage < 1.5 mV RMS, current < 1 mA RMS)
- Serial and parallel operation to extend voltage or current
- Protection functions to safeguard instrument and DUT: overload and short-circuit protection, per channel
- Automatic switching between constant voltage (CV) and constant current (CC)
- Tracking and channel link functions
- EasyArb arbitrary waveform generation
- Remote sensing for more stringent voltage accuracy requirements
- Save and recall of instrument settings; output terminals on both front and rear panels
- Compact build with a quiet fan, for the laboratory and the production floor
Typical applications
- Production test and quality inspection of electronic products
- General-purpose supply in development and engineering laboratories
- Repair and maintenance benches
- Training and school laboratories
- Development of battery-powered devices and multi-rail power systems
- Testing automotive electronics and industrial control modules
Configure your R&S®HMP4000 Series
Pick a base model and its options, watch your order list build as you go, then send it for a quote in one click. Every order number (Order No.) comes from Rohde & Schwarz factory data.
2
Hardware options
3 options
3
Accessories
1 optionAvailable models / variants
The series comprises the 2 variants below. Click "Request a quote" for full specifications and pricing on a given model from KanTek.
| Model | Differences | |
|---|---|---|
| HMP4030 | Three-channel high-power supply, up to 384 W (order no. 3629.6776.03) | Request a quote → |
| HMP4040 | Four-channel high-power supply, up to 384 W (order no. 3629.6776.04) | Request a quote → |
Frequently asked questions
Yes. KanTek Technology is the authorized Taiwan distributor for Rohde & Schwarz, supplying new R&S®HMP4000 Series instruments with factory quotations and technical advice.
Instrument rental is launching soon. R&S®HMP4000 Series is part of the line-up being prepared, and advance enquiries are welcome.
Yes. KanTek provides calibration and repair for R&S®HMP4000 Series, with calibration performed by a partner laboratory, to keep the instrument accurate and available.
Use Request a quote on this page, or call +886-2-2999-7719. KanTek replies within 24 hours with pricing, lead time and the options that suit your application.
R&S®HMP4000 Series is a Rohde & Schwarz product: Three/four-channel high-power linear power supply (up to 384 W). Contact KanTek for selection or application advice.
Authorized R&S distributor
Repair and calibration services
Instrument rental, launching soon
Reply within 24 hours
Need R&S®HMP4000 Series pricing, rental or calibration?