1
R&S®HMP2000 series
Two/three-channel linear programmable DC power supply
- Category: Power supply
- Manufacturer: Rohde & Schwarz
- Output channels: 2 or 3 channels, all galvanically isolated and floating
- Maximum total output power: 188 W
- Voltage range: 0 V to 32 V (per channel)
- Current range: 0 A to 5 A (up to 10 A on HMP2020 CH1)
- Maximum power per channel: 80 W (160 W on HMP2020 CH1)
- Voltage ripple: < 1.5 mV RMS
- Current ripple: < 1 mA RMS
- Setting resolution: 1 mV voltage / 0.1 mA current
- Operating modes: Constant voltage (CV) / constant current (CC), serial and parallel operation
- Remote sense: Supported, compensates for lead voltage drop
- Display interface: 240 × 64 pixel LCD display showing the status of each channel
- Standard interfaces: USB / LAN (depending on configuration)
- Data sheet: Download PDF
- External link: Official product page
Overview
The R&S®HMP2000 series is a performance linear DC power supply with two independently programmable outputs (HMP2020) or three (HMP2030) and up to 188 W of total output power. Every channel is galvanically isolated and floating, so channels can be connected in series or in parallel, and each switches automatically between constant voltage (CV) and constant current (CC). The linear design keeps ripple and noise low, and the instrument adds protection against overload and short circuit plus remote sensing for tighter accuracy — a fit for development laboratories, production test and service work.
Key features
- Two (HMP2020) or three (HMP2030) independent outputs, 188 W total
- All channels galvanically isolated and floating, free to be wired in series or in parallel to extend voltage or current
- Linear design with low noise and low ripple (<1.5 mV RMS), suited to precision circuit testing
- Fine setting resolution: 1 mV voltage / 0.1 mA current
- 240 × 64 pixel LCD display shows the CV/CC state clearly for at-a-glance operation
- Remote sensing compensates for the voltage drop along long supply leads
- Protection functions to safeguard the instrument and the DUT: overload, overvoltage and short circuit
- Small, compact and quiet — at home on the bench or in a rack
- Interface modules for integration into automated test equipment (ATE)
- EasyArb arbitrary waveform and EasyRamp ramp functions
Typical applications
- Circuit design and verification in the development laboratory
- Automated production test and quality control (ATE integration)
- Electronics repair and maintenance services
- Training and undergraduate electronics laboratories
- Battery and power management IC development
- Powering embedded and IoT devices under test
- Functional verification of communications and avionics modules
Configure your R&S®HMP2000 Series
Pick a base model and its options, watch your order list build as you go, then send it for a quote in one click. Every order number (Order No.) comes from Rohde & Schwarz factory data.
2
Hardware options
3 options
3
Accessories
1 optionAvailable models / variants
The series comprises the 2 variants below. Click "Request a quote" for full specifications and pricing on a given model from KanTek.
| Model | Differences | |
|---|---|---|
| HMP2020 | Two-channel linear power supply, 188 W (CH1: 32 V/10 A, CH2: 32 V/5 A); order no. 3629.6718.02 | Request a quote → |
| HMP2030 | Three-channel linear power supply, 188 W (3 x 32 V/5 A); order no. 3629.6718.03 | Request a quote → |
Frequently asked questions
Yes. KanTek Technology is the authorized Taiwan distributor for Rohde & Schwarz, supplying new R&S®HMP2000 Series instruments with factory quotations and technical advice.
Instrument rental is launching soon. R&S®HMP2000 Series is part of the line-up being prepared, and advance enquiries are welcome.
Yes. KanTek provides calibration and repair for R&S®HMP2000 Series, with calibration performed by a partner laboratory, to keep the instrument accurate and available.
Use Request a quote on this page, or call +886-2-2999-7719. KanTek replies within 24 hours with pricing, lead time and the options that suit your application.
R&S®HMP2000 Series is a Rohde & Schwarz product: Two/three-channel linear programmable DC power supply. Contact KanTek for selection or application advice.
Authorized R&S distributor
Repair and calibration services
Instrument rental, launching soon
Reply within 24 hours
Need R&S®HMP2000 Series pricing, rental or calibration?