1
R&S®FSMR3000
Microwave measuring receiver (100 kHz – 50 GHz, signal generator calibration)
- Category: Measuring receiver
- Manufacturer: Rohde & Schwarz
- Frequency range (base model): 100 kHz to 8 / 26.5 / 50 GHz
- Level measurement range: –152 to +30 dBm
- Level linearity: 0.009 ± 0.005 per 10 dB step
- Analysis bandwidth: up to 80 MHz
- Phase noise (typ., 10 kHz offset, 1 GHz): –163 dBc/Hz
- Displayed average noise level (FSMR3008, 1 GHz): –158 dBm
- Displayed average noise level (FSMR3026/3050, 1 GHz): –156 dBm
- Modulation measurement uncertainty (AM/FM/PM): < 0.5 %
- Data sheet: Download PDF
- Product brochure: Download PDF
- External link: Official product page
Product overview
The R&S®FSMR3000 is a microwave measuring receiver built to reduce complexity in calibration: one instrument that calibrates signal generators and attenuators alike. It offers tuned RF level (TRFL) measurements, level measurements, analog modulation analysis and spectrum analysis, and with the right hardware options it becomes a high-end phase noise tester. Digital and analog modulation analysis, 80 MHz of analysis bandwidth, and pulse and VOR/ILS signal analysis round out a complete solution for a calibration laboratory.
Key features
- Tuned RF level (TRFL) calibration and power measurement, with outstanding linearity across the whole level range
- R&S®NRP power sensors connect directly and are recognized automatically
- AM/FM/PM modulation analysis, including audio parameter measurements and a choice of deemphasis settings
- Full signal and spectrum analyzer functions, covering harmonics, TOI, noise figure and phase noise
- High-end phase noise analyzer with cross-correlation, demodulating through a CORDIC algorithm and showing AM noise alongside phase noise
- Works with the R&S®NRP50T power sensor for coverage from DC to 50 GHz
- 80 MHz analysis bandwidth (with the B1 + B8 options) for wideband digitally modulated signals
- VOR/ILS avionics navigation signal measurements (option K15)
Typical applications
- Calibration and performance verification of signal generators
- Calibration and performance verification of fixed and step attenuators
- High-accuracy RF power and level measurements
- Avionics (VOR/ILS) signal measurement and verification
- High-end phase noise testing and analysis
- Analysis of digitally and analog modulated signals (AM/FM/PM)
Configure your R&S®FSMR3000
Pick a base model and its options, watch your order list build as you go, then send it for a quote in one click. Every order number (Order No.) comes from Rohde & Schwarz factory data.
2
Hardware options
12 options
3
Software options (K-options)
11 options
4
Accessories
1 optionAvailable models / variants
This series comes in the 3 model variants below. Click Request a quote to ask KanTek for the full specifications and a price for the model you need.
| Model | Specification | |
|---|---|---|
| R&S®FSMR3008 (1345.4004.08) | 8 GHz measuring receiver, DANL –158 dBm, phase noise –163 dBc/Hz (1 Hz bandwidth) (100 kHz – 8 GHz) | Request a quote → |
| R&S®FSMR3026 (1345.4004.26) | 26.5 GHz measuring receiver, DANL –156 dBm, phase noise –163 dBc/Hz (1 Hz bandwidth) (100 kHz – 26.5 GHz) | Request a quote → |
| R&S®FSMR3050 (1345.4004.50) | 50 GHz measuring receiver, DANL –156 dBm, phase noise –163 dBc/Hz (1 Hz bandwidth) (100 kHz – 50 GHz) | Request a quote → |
Frequently asked questions
Yes. KanTek Technology is the authorized Taiwan distributor for Rohde & Schwarz, supplying new R&S®FSMR3000 instruments with factory quotations and technical advice.
Instrument rental is launching soon. R&S®FSMR3000 is part of the line-up being prepared, and advance enquiries are welcome.
Yes. KanTek provides calibration and repair for R&S®FSMR3000, with calibration performed by a partner laboratory, to keep the instrument accurate and available.
Use Request a quote on this page, or call +886-2-2999-7719. KanTek replies within 24 hours with pricing, lead time and the options that suit your application.
R&S®FSMR3000 is a Rohde & Schwarz product: Microwave measuring receiver (100 kHz – 50 GHz, signal generator calibration). Contact KanTek for selection or application advice.
Authorized R&S distributor
Repair and calibration services
Instrument rental, launching soon
Reply within 24 hours
Need R&S®FSMR3000 pricing, rental or calibration?