1
Phasing out
Rohde & Schwarz states that this handheld is being phased out, and has not yet announced a successor. To buy one, to keep an existing instrument in service, or to look at alternatives, please contact us about availability, used units, compatible alternatives and spare parts.
Rohde & Schwarz states that this handheld is being phased out, and has not yet announced a successor. To buy one, to keep an existing instrument in service, or to look at alternatives, please contact us about availability, used units, compatible alternatives and spare parts.
R&S®FSH Phasing out
Handheld spectrum analyzer (9 kHz – 20 GHz)
- Category: Handheld spectrum analyzer
- Manufacturer: Rohde & Schwarz
- Frequency range: 9 kHz to 20 GHz (model dependent)
- Sensitivity (with preamplifier, 1 Hz RBW): < –161 dBm
- Displayed average noise level (DANL) at 1 GHz, 1 Hz RBW: –163 dBm
- DANL (8 GHz to 13.6 GHz, with preamplifier): –162 dBm (typ.)
- Phase noise (500 MHz, 1 MHz offset): –127 dBc (1 Hz)
- Third-order intercept TOI (IP3), 300 MHz to 3.6 GHz: +15 dBm (typ.)
- Display: Touchscreen
- Housing protection class: Rugged, splash-proof housing with a built-in carrying handle
- Battery capacity (standard): 4.5 Ah Li-Ion
- Battery capacity (with B106 option): 6.75 Ah Li-Ion
- Data sheet: Download PDF
- Product brochure: Download PDF
- External link: Official product page
Product overview
The R&S®FSH is an all-in-one handheld analyzer — spectrum analyzer, network analyzer, cable and antenna tester (CAT) and interference hunter — covering up to 20 GHz. The rugged, splash-proof housing and built-in handle are made for work outdoors. Excellent sensitivity (below –161 dBm with the preamplifier), an internal tracking generator, a VSWR bridge and a bias tee mean one instrument covers base station installation and maintenance, transmitted signal analysis (LTE, NB-IoT, TD-SCDMA, WCDMA, CDMA, GSM), antenna and cable measurements, interference analysis and EMC diagnosis — everything a field engineer needs in a single box.
Key features
- Coverage from 9 kHz to 20 GHz, for wireless, satellite and microwave measurements alike
- All in one: spectrum analyzer, network analyzer and cable and antenna tester (CAT)
- Internal tracking generator, VSWR bridge and bias tee, so scalar and vector network analysis need no extra accessories
- Excellent sensitivity: displayed noise floor below –161 dBm (1 Hz RBW) with the preamplifier
- Excellent phase noise: –127 dBc (1 Hz) at 500 MHz, 1 MHz offset, for accurate modulated signal analysis
- Rugged, splash-proof housing with a built-in handle, for field measurements in rough conditions
- Touchscreen operation, with a broad catalogue of optional software modules adding LTE, NB-IoT, WCDMA, GSM and other cellular measurements
- Geotagging and indoor mapping support, which makes locating and recording an interference source straightforward
Typical applications
- Base station installation, maintenance and signal quality verification (LTE, NB-IoT, TD-SCDMA, WCDMA, CDMA, GSM)
- Reflection coefficient, voltage standing wave ratio (VSWR) and distance-to-fault (DTF) measurements on antennas and cables
- Interference analysis, spectrum monitoring and band occupancy surveys in the field
- EMC/EMI diagnosis, in the laboratory or on a service call
- Scalar and vector network analysis, with transmission and reflection measurements
- Radar pulse measurements and electromagnetic field (EMF) exposure measurements
Configure your R&S®FSH
Pick a base model and its options, watch your order list build as you go, then send it for a quote in one click. Every order number (Order No.) comes from Rohde & Schwarz factory data.
2
Hardware options
1 option
3
Software options (K-options)
26 options
4
Probes
5 options
5
PC software
2 optionsAvailable models / variants
This series comes in the 8 model variants below. Click Request a quote to ask KanTek for the full specifications and a price for the model you need.
| Model | Specification | |
|---|---|---|
| R&S®FSH4 (1309.6000.04) | 9 kHz ~ 3.6 GHz | Request a quote → |
| R&S®FSH4 (1309.6000.24) | 100 kHz ~ 3.6 GHz | Request a quote → |
| R&S®FSH8 (1309.6000.08) | 9 kHz ~ 8 GHz | Request a quote → |
| R&S®FSH8 (1309.6000.28) | 100 kHz ~ 8 GHz | Request a quote → |
| R&S®FSH13 (1314.2000.13) | 9 kHz ~ 13.6 GHz | Request a quote → |
| R&S®FSH13 (1314.2000.23) | 9 kHz ~ 13.6 GHz | Request a quote → |
| R&S®FSH20 (1314.2000.20) | 9 kHz ~ 20 GHz | Request a quote → |
| R&S®FSH20 (1314.2000.30) | 9 kHz ~ 20 GHz | Request a quote → |
Frequently asked questions
Yes. KanTek Technology is the authorized Taiwan distributor for Rohde & Schwarz, supplying new R&S®FSH instruments with factory quotations and technical advice.
Instrument rental is launching soon. R&S®FSH is part of the line-up being prepared, and advance enquiries are welcome.
Yes. KanTek provides calibration and repair for R&S®FSH, with calibration performed by a partner laboratory, to keep the instrument accurate and available.
Use Request a quote on this page, or call +886-2-2999-7719. KanTek replies within 24 hours with pricing, lead time and the options that suit your application.
R&S®FSH is a Rohde & Schwarz product: Handheld spectrum analyzer (9 kHz – 20 GHz). Contact KanTek for selection or application advice.
Authorized R&S distributor
Repair and calibration services
Instrument rental, launching soon
Reply within 24 hours
Need R&S®FSH pricing, rental or calibration?