1
R&S®BBL200
High-power broadband amplifier (9 kHz – 250 MHz, up to 10 kW)
- Category: Broadband amplifier
- Manufacturer: Rohde & Schwarz
- Frequency range: 9 kHz – 250 MHz
- Output power (P1dB): 3000 W / 5000 W / 10000 W
- Amplifier class: Class A linear amplifier
- Mismatch tolerance: 100%
- Cooling: Liquid-cooled
- Modulation: AM, FM, PM, pulse, OFDM
- Remote control interfaces: LAN (Ethernet) / SCPI commands / web GUI / GPIB (optional)
- Operating modes: Continuous operation
- Data sheet: Download PDF
- Product brochure: Download PDF
- External link: Official product page
Product overview
The R&S®BBL200 broadband amplifiers are the right choice wherever high RF power is needed. They are linear Class A amplifiers delivering 3 kW, 5 kW or 10 kW of output power over a frequency range of 9 kHz to 250 MHz. The liquid-cooled, solid-state, high-endurance design runs quietly and efficiently, and precise monitoring of every operating parameter gives maximum stability and reliability. The amplifiers are designed for continuous operation and hold their output power even under mismatch conditions.
Key features
- Frequency range of 9 kHz to 250 MHz, for wideband applications
- Output power of 3000 W, 5000 W or 10000 W at the 1 dB compression point, so the power class can be matched to the job
- 100 % mismatch tolerance: rated power is still delivered at VSWR 6:1, which is what EMC testing with antennas away from 50 Ω needs
- Advanced RF design and leading power semiconductors, combined with decades of Rohde & Schwarz amplifier development, set the benchmark
- Liquid cooling keeps the amplifier modules cool and lets the heat exchanger be installed away from the amplifier, cutting noise and temperature inside the rack
- AM, FM, PM, pulse and OFDM modulation, for many kinds of test signal
- Lean firmware with effective monitoring and protection, so operation stays safe even with the RF output shorted or open
- Built-in web GUI, operated over LAN from a browser, with SCPI remote control commands for test automation
Typical applications
- EMC testing: high field strength radiated tests using mismatched antennas
- Device under test measurements: components or systems whose input impedance is away from 50 Ω
- Particle accelerator research: driving cavity resonators that need high RF power, in accelerator physics experiments
- Aerospace and defense: high-power RF signal generation for environmental testing and system validation
- Laboratory and field testing: high-power CW and modulated signals in all kinds of test environment
Configure your R&S®BBL200
Pick a base model and its options, watch your order list build as you go, then send it for a quote in one click. Every order number (Order No.) comes from Rohde & Schwarz factory data.
2
Hardware options
6 optionsAvailable models / variants
This series comes in the 5 variants below. Click Request a quote to ask KanTek for the full specifications and a price for the model you need.
| Model | Specification | |
|---|---|---|
| R&S®BBL200-A3000 | 9 kHz – 225 MHz / 3000 W | Request a quote → |
| R&S®BBL200-A3000 | 9 kHz – 250 MHz / 3000 W | Request a quote → |
| R&S®BBL200-A5000 | 9 kHz – 225 MHz / 5000 W | Request a quote → |
| R&S®BBL200-A10000 | 9 kHz – 225 MHz / 10000 W | Request a quote → |
| R&S®BBL200-A10000 | 9 kHz – 250 MHz / 10000 W | Request a quote → |
Frequently asked questions
Yes. KanTek Technology is the authorized Taiwan distributor for Rohde & Schwarz, supplying new R&S®BBL200 instruments with factory quotations and technical advice.
Instrument rental is launching soon. R&S®BBL200 is part of the line-up being prepared, and advance enquiries are welcome.
Yes. KanTek provides calibration and repair for R&S®BBL200, with calibration performed by a partner laboratory, to keep the instrument accurate and available.
Use Request a quote on this page, or call +886-2-2999-7719. KanTek replies within 24 hours with pricing, lead time and the options that suit your application.
R&S®BBL200 is a Rohde & Schwarz product: High power broadband amplifier (9 kHz – 250 MHz, up to 10 kW). Contact KanTek for selection or application advice.
Authorized R&S distributor
Repair and calibration services
Instrument rental, launching soon
Reply within 24 hours
Need R&S®BBL200 pricing, rental or calibration?